Power Carving a Great White Shark out of Walnut | Wood Carving

In this video, I power carve a great white shark, as though it is jumping out of the water. I had a lot of fun with this little carving and I hope you enjoy watching the process!

Tools used:

•Dremel https://amzn.to/36yTHKC

•Flex-shaft (a must-have!) https://amzn.to/2qVnzBI

•Carbide burrs https://amzn.to/2PhCH5C

•Diamond burrs https://amzn.to/35y519q

•Coping saw
https://www.amazon.com/gp/product/B00QMJ8J4C/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B00QMJ8J4C&linkCode=as2&tag=rossdavidart-20&linkId=dca5892f5c17de941a8dbb885c12e9e0

DISCLAIMER: This video and/or the description contains affiliate links, which means that if you purchase through one of the product links, I'll receive a small commission. This helps support the channel and allows me to continue making videos like this. Thank you for the support!
___________________________________________

For this wood carving, I just used a scrap of walnut that I had laying around.
No fancy rotary carver, just a basic Dremel 1000 with a flex-shaft attachment (a must!) which really helps with maneuvering.

Sanding drum bits to rough out the shape, followed by ball, cylinder, and cone shaped carbide burs for most of the carving. These were given to me, but decent carbide burs can run for $5 a piece or more. For finer details and smoothing out the rough parts I used ball and cone shaped diamond tip burs (very cheap, $2ish from Walmart for 6 of them)

To finish up, I used 220 grit sandpaper on the shark to really smooth him out. Not nearly as much on the water, as I wanted it to remain textured and knew I'd be coating it heavily with the gloss polyurethane.

Covered the water in masking tape, sprayed him with matte poly, took the tape off and brushed on the oil-based (thicker) gloss poly.

All in an on-and-off months work!

If you have ANY questions, drop a comment below!

Follow me on Instagram! @Rossthemaker

and Facebook @Rossthemaker

Видео Power Carving a Great White Shark out of Walnut | Wood Carving канала Ross The Random