North Wales 1.5 Kw Hydroelectric System Part 5 Making The Turgo Turbine
This week I have been working on the turgo turbine for the customer hydro electric installation. it is a 170mm pcd 17 spoon turgo turbine with a 2" bsp spear valve mounted in a custom made stainless steel housing. I have taken everything I have learnt from mine and applied all the changes I would have done if I had the skills and tools at the time. I think it came out well and im quite sure it will be very efficant
Видео North Wales 1.5 Kw Hydroelectric System Part 5 Making The Turgo Turbine канала Kris Harbour Natural Building
Видео North Wales 1.5 Kw Hydroelectric System Part 5 Making The Turgo Turbine канала Kris Harbour Natural Building
Показать
Комментарии отсутствуют
Информация о видео
9 сентября 2022 г. 22:47:16
00:31:48
Другие видео канала
Garden Improvements, Fencing, Gate Making And Bench RestorationTimber Framed Barn Part 18 Main Roof PurlinsShearing our own sheepJobs Around The Farm And Barn Raising UpdateTimber Framed Barn Part 13 Timber Frame CompleteTimber Framed Barn Part 12 Milling Milling And More MillingTimber Framed Barn Part 11 Cross Frames And Oak PegsTimber Framed Barn Part 9 Wall Frames CompleteTimber Framed Barn Part 8 Framing Has Started!Timber Framed Barn Part 7 More Milling And Temporary WorkshopHand Carved 2m Wooden Wind Turbine BladesTimber Framed Barn Part 6 Forms Off - Foundation Finished.Timber Framed Barn Part 5 Post FoundationsTimber Framed Barn Part 4 Milling 20 Tons Of Logs In To 8x8'sRebuilding My 26 Year Old Vans Engine While I Wait Out The Bad WeatherTimber Framed Barn Part 3 Log Delivery And Starting The Foundation.Timber Framed Barn Part 2 DIY Post Mount BasesBig Timber Framed Barn Build Part 1 The DesignTraditional Mortise And Tenon Door For The Timber Framed GreenhouseOff Grid 2 KW Axial Flux Wind Turbine And MPPT Dump Load Controler BuildHydroelectric Turbine Pipe Burst Fail