Timber Framed Barn Part 2 DIY Post Mount Bases
It has been very wet for the last few weeks and I have not been able to get out to mill timber or start the foundation but one job I could get done was the post bases. These bases serve two functions. one is to get the bottom of the post away from the ground to stop it rotting and the other is to fix the post down to the foundation. the barn is in a windy location and it needs to be firmly fixed down.
Видео Timber Framed Barn Part 2 DIY Post Mount Bases канала Kris Harbour Natural Building
Видео Timber Framed Barn Part 2 DIY Post Mount Bases канала Kris Harbour Natural Building
Показать
Комментарии отсутствуют
Информация о видео
9 декабря 2022 г. 20:16:46
00:16:14
Другие видео канала
Powering An Old Mill 1.5 Kw Lake District Overshot Waterwheel Project Part 4Powering An Old Mill - 1.5 Kw Lake District Overshot Waterwheel Project Part 2Timber Framed Barn Part 18 Main Roof PurlinsShearing our own sheepJobs Around The Farm And Barn Raising UpdateTimber Framed Barn Part 13 Timber Frame CompleteTimber Framed Barn Part 12 Milling Milling And More MillingTimber Framed Barn Part 11 Cross Frames And Oak PegsTimber Framed Barn Part 9 Wall Frames CompleteTimber Framed Barn Part 8 Framing Has Started!Timber Framed Barn Part 7 More Milling And Temporary WorkshopHand Carved 2m Wooden Wind Turbine BladesTimber Framed Barn Part 6 Forms Off - Foundation Finished.Timber Framed Barn Part 5 Post FoundationsTimber Framed Barn Part 4 Milling 20 Tons Of Logs In To 8x8'sRebuilding My 26 Year Old Vans Engine While I Wait Out The Bad WeatherTimber Framed Barn Part 3 Log Delivery And Starting The Foundation.Big Timber Framed Barn Build Part 1 The DesignTraditional Mortise And Tenon Door For The Timber Framed GreenhouseOff Grid 2 KW Axial Flux Wind Turbine And MPPT Dump Load Controler Build