Robland X 31 Riving Knife

The Robland X-31 riving knife can be hard to come by so this is a video of altering a Biesemeyer 78-965 thin kerf and 78-967 medium to thick kerf riving knife for use in the X31. The holes in the knife were drilled so that the knife sits approximately 5/16” below the top of the blade. If you wish your knife to be higher adjust the holes accordingly. The templates for the riving knives can be found at https://groups.io/g/roblandx31/message/9745
Caution should be taken when using power equipment or tools and all recommended safety precautions from the tool or equipment manufacture should be utilized.
https://www.amazon.com/Delta-78-965-Biesemeyer-Kerfs-Riving/dp/B001Y65N2E/ref=sr_1_4?dchild=1&keywords=Biesemeyer+Riving+Knife&qid=1630113284&sr=8-4
https://www.amazon.com/Biesemeyer-Riving-Knife-9-1/dp/B001Y6APMM/ref=sr_1_3?dchild=1&keywords=Biesemeyer+Riving+Knife&qid=1630113284&sr=8-3

Видео Robland X 31 Riving Knife канала david pape