Connecting AC Line Set Soldering Pipes to Condenser
I am finishing hooking up the air conditioner’s line set to the condenser. I solder in the fittings using Staybrite 8. The line-set doesn’t reach the condenser. Therefore, i have to add a piece of copper pipe for the suction line. Afterwards i connect the liquid line drier. Plus more 3/8 liquid line piping to the service valve.
Видео Connecting AC Line Set Soldering Pipes to Condenser канала The HVAC Hacker
Видео Connecting AC Line Set Soldering Pipes to Condenser канала The HVAC Hacker
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Interesting AC Freon Leak
Black Ice Offensive?
Boiler Leaky Air Vent Repair
HVAC Hacks: Roof or Dumpster?
Reset Water Heater Locked Out Ignition Failure Previously Soldered Leak on Tank
AC Troubleshooting Low Superheat
Removing Nailed Hot Water Baseboards
AC Outdoor Condenser Not Turning On
Customer Mistake Leads to Easy AC Service Call
AC Water Leak
AC Compressor Hums Yet Not Turning On
One AC Not Cooling On Hot Days Other HVAC system cooling Multiple HVAC
AC Blowing Warm Air Condenser Not Turning On
HVAC Hacks: Check Out Hacked In AC Filter Drier
No Ac Call Back? Compressor not Running
HVAC Troubleshooting/ Diagnosing ECM Blower Motor No Air Out Of AC Vents
Starting Semi Hermetic Compressor Carlyle 06D
Happy July 4th NYC/ Jersey City Firework Show
AC / Dehumidification System High Head Pressure Alarm
Commercial HVAC Service Survival Tip Hot Days/ Replace Contactor & Belt