Ep1: Design Features and Starting the Frame // The DIY Laser Cutter Build Series
The documentation is now ready!
https://www.furtherfabrication.com/resources?category=Y1200
We're kicking off the first episode by taking a look at the design features of the CO2 Laser Cutter, then we jump into getting started building the frame.
BTS and more info:
instagram.com/further_fabrication/
furtherfabrication.com/
Fusion 360:
autodesk.com/products/fusion-360/overview
Видео Ep1: Design Features and Starting the Frame // The DIY Laser Cutter Build Series канала Further Fabrication
https://www.furtherfabrication.com/resources?category=Y1200
We're kicking off the first episode by taking a look at the design features of the CO2 Laser Cutter, then we jump into getting started building the frame.
BTS and more info:
instagram.com/further_fabrication/
furtherfabrication.com/
Fusion 360:
autodesk.com/products/fusion-360/overview
Видео Ep1: Design Features and Starting the Frame // The DIY Laser Cutter Build Series канала Further Fabrication
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Ep2: Back on Track? The DIY Laser Cutter/Engraver Build Series06 Build Your Own Laser - Wiring of ComponentsGlowforge Killer: half the price, twice the power08 Build Your Own Laser - Laser Tube Installation, Alignment & Water ProtectDon't use strong lasers without this - easy to make!DIY Laser Cutter Buildlog - IntroductionHow To Make A Lathe Machine | Homemade Woodworking Lathe Machine | DIYHow CO2 Laser Cutters work and ...Why you might want to build one!How To Start Designing RC Airplanes in Fusion 360 Tutorial [Episode 1]Ortur LASER Master 2 PRO Enclosure - Step by Step GuideCo2 Laser 600x400 part1Homemade CO2 Laser TubeCUSTOM CNC PLASMA TABLE BUILD!!Ep4: Starting the Electronics. The DIY CO2 Laser Cutter / Engraver Build Series05 Build Your Own Laser - Tube & Mirror Mounts + Stepper MotorsMaking A Circular Saw Sliding Guide | Homemade Sliding Saw Very EasyEp10: A little Upgrade. The DIY CO2 Laser Cutter / Engraver Build SeriesEp9: Finished? The DIY CO2 Laser Cutter / Engraver Build Series