Co2 Laser 600x400 part1

PART 1
CO2 laser with working area of 600mm by 400mm. built from start to end. This is Part 1. The inner frame. Everything is made with allu profiles and linear rails on the X and Y axis.
This CO2 laser has been fully adapted and all 3D printed pieces have been redrawn by me, this for the adjustment to linear rail system.
Because quite a few people have already asked if this is the model of Further Fabrication. I had already purchased the model and plans from Further Fabriction and built his model. see video link: https://youtu.be/0c3HBBoUqQk
downloads to Further Fabrication are available for the co2 laser 600x400
https://www.furtherfabrication.com/new-blog/2019/4/20/the-laser-cutter-build-series

But my model is no longer the same as his model, although you can use his building book as a model and guidance . Then you have to adjust all sizes of the allu profiles and change 3D prints, because it is not with V-wheels, but with linear rails. The outer frame is also made of three parts. one for the laser itself, one frame for electro components and one for the extension of the laser tube if necessary.
So you have to decide for yourself what you want to do.
I recommend downloading his guide manual as a reference and then follow my video to adjust all sizes of the profiles, before you order the profiles if you don't cut them yourself.
the only parts such as my self-drawn 3D prints are not available at Further Fabrication.
link for the build guide: https://www.furtherfabrication.com/resources/y400buildguide

link to my 3 parts:
https://drive.google.com/file/d/1-aM0NhMfkDFz0nBsl0M0ORXafE1nr4xH/view?usp=sharing
PS:
Further fabrication,
has now done an update to linear rails, posted: 23/4/2021
see his video.
also the 3d printed parts.
And better Y engine design.
see link: https://www.youtube.com/watch?v=seQAV-ozqNo
if you want a better system, use this one from Further Fabrication. designed by Rob
I hope I made this clear.

I'm not sponsored by anyone and do everything on my own. a donation no matter how small is always welcome but not mandatory.
https://paypal.me/PRommens?locale.x=nl_NLD

Видео Co2 Laser 600x400 part1 канала Philippe Rommens