05 Build Your Own Laser - Tube & Mirror Mounts + Stepper Motors

In this video I continue the Laser Build by installing the Laser Tube Mounts, and the Mirror mounts. I also install the stepper motors to the mounts on the X&Y Axis.

Stepper Motors, Stepper Drivers and More for your DIY Laser Build at -- https://www.omc-stepperonline.com//?tracking=5f7ce36148d79

The mechanical parts I am using for this build are from Cloudray Laser https://www.cloudraylaser.com

More Info and Product Information I Use for This Build Can be found on my Website Here - https://mwlaser.com.au/diy-laser-build/

The Mechanical parts I used are from Cloudray - This set below is for the size I am building 1300x900mm cutting area. It comes with all mechanical components, laser lens head, mirror mounts, tube mounts stepper motor mounts, axis rails and timing belt.

http://s.click.aliexpress.com/e/CcVFEAla - Product - Cloudray Mechanical Parts Set 1300*900mm Inner Sliding Rails Kits Spare Parts for DIY 1390 CO2 Laser Engraving Cutting Machine

The Gas lift struts I ordered from AliExpress here (TYPE-L) http://s.click.aliexpress.com/e/kLLwji4C

The stepper motors I use are Leadshine 573S15-L and 573S09-L (Links Below For More Info)

http://s.click.aliexpress.com/e/tZv2XXhO - Cloudray Leadshine 3 phase Stepper Motor 573S15 573S15-L for NEMA23 5.8A length 76mm Shaft 8mm

http://s.click.aliexpress.com/e/qHJViDx2 - Cloudray Leadshine 3 Phase Stepper Motor 573S09-L-18 for NEMA23 3.5A Length 50mm Shaft 6.35mm

Amazon Links.
Cloudray Single Head Linear Guides Complete Set 6040 Incl. Stepper Motor and Driver for CO2 Laser Engraver Cutter DIY - https://amzn.to/2SJ8PiQ

Cloudray Mechanical Parts Set Inner Sliding Rails Kit - https://amzn.to/2XBYzK6

Cloudray Laser Power Supply - https://amzn.to/2LH9uzP

10600nm Laser Safety Goggles - https://amzn.to/2XCXpCE

Cloudray Lift Metal Parts with Stepper Motor and Motor Driver - https://amzn.to/2XzHQMd

CO2 Laser Tube Holders - https://amzn.to/2XynrXX

Cloudray CR35 + CR45 Laser Tube - https://amzn.to/2XzzF2k

RECI Laser Tubes - https://amzn.to/2xDPLbZ

Red Mushroom Emergency Stop Button - https://amzn.to/2xCwGa5

TROCEN AWC708S Controller - https://amzn.to/2xHkYuI

RIUDA RDC6442 Controller - https://amzn.to/2YETqSJ

Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit Matt's Workshop at NEW WEBSITE: https://www.mwlaser.com.au
Instagram https://www.instagram.com/mattsworkshop/
Facebook https://www.facebook.com/mattsworkshopau

== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here --- https://www.paypal.me/mattsworkshop --- Thank You ====

Any questions please feel free to email me matt@mwlaser.com.au or leave a comment below.

DISCLAIMER: The producer of this video under no circumstances can be found liable for negligence by a viewer if they are seriously injured, dies or suffers damage to their property after acting upon or using the content contained in this video production. Any person/s acting on information contained in this video do so at their own risk. The viewer also acknowledges they must follow all local and national laws and regulations when performing any work described in this video production.

NOTE: This is not a paid production or advertisement. The featured products are provided by Cloudray to allow me to provide viewers with an installation / how-to video.

Видео 05 Build Your Own Laser - Tube & Mirror Mounts + Stepper Motors канала MW Laser