06 Build Your Own Laser - Wiring of Components

In this video I continue the Laser Build by wiring up the components, such as the Laser PSU, DC Power Supplies, Stepper Drivers and Stepper Motors, Ultimate Air Assist to the TROCEN AWC708S Controller. The main electrical components I am using for this build are from Cloudray Laser Visit them at https://www.cloudraylaser.com OR Cloudray’s AliExpress Store - http://s.click.aliexpress.com/e/p2mI2aPW

A PDF Wiring Guide for the DIY Laser is available here - https://mwlaser.com.au/product/ebook-matts-diy-laser-wiring-guide/

IF You require a Wiring Guide for the RUIDA RDC644X Controllers is is now available at https://mwlaser.com.au/product/ebook-matts-diy-laser-wiring-guide-for-ruida-rdc-644x-controllers/

DISCLAIMER: The producer of this video under no circumstances can be found liable for negligence by a viewer if they are seriously injured, dies or suffers damage to their property after acting upon or using the content contained in this video production. Any person/s acting on information contained in this video do so at their own risk. The viewer also acknowledges they must follow all local and national laws and regulations when performing any work described in this video production. MAINS POWER CONNECTIONS MUST ONLY BE INSTALLED BY A LICENSED PROFESSIONAL.

More Info and Product Information I Use for This Build Can be found on my Website Here - https://mwlaser.com.au/diy-laser-build/ I will have more information and diagrams available on my website within the next week or two.

The stepper motors I use are Leadshine 573S15-L and 573S09-L (Links Below For More Info)

http://s.click.aliexpress.com/e/tZv2XXhO - Cloudray Leadshine 3 phase Stepper Motor 573S15 573S15-L for NEMA23 5.8A length 76mm Shaft 8mm

http://s.click.aliexpress.com/e/qHJViDx2 - Cloudray Leadshine 3 Phase Stepper Motor 573S09-L-18 for NEMA23 3.5A Length 50mm Shaft 6.35mm

The Stepper Drivers are the 3DM580 and DMA860H
3DM580 - http://s.click.aliexpress.com/e/DSCLJBgk
DMA860H - http://s.click.aliexpress.com/e/BzpXuSoC

36V PSU - Meanwell LRS-350 Switching Power Supply - http://s.click.aliexpress.com/e/BvPFDXHe
24V PSU - Meanwell LRS-75 Switching Power Supply - http://s.click.aliexpress.com/e/N3rtihfw

Cloudray Laser Power Supply - https://amzn.to/2LH9uzP

Cloudray Cable Chains - http://s.click.aliexpress.com/e/DHmom76u

Cloudray Lift Metal Parts with Stepper Motor and Motor Driver - (SET B) http://s.click.aliexpress.com/e/2cEMWnJi

Red Mushroom Emergency Stop Button - https://amzn.to/2xCwGa5

TROCEN AWC708S Controller - http://s.click.aliexpress.com/e/noq4O7kM

The Wire I Used to hook up the electrical components was purchased from AliExpress it comes in a box of six colours - https://mwlaser.com.au/product/42m-box-hook-up-24awg-wire-6-colours/

The Ultimate Air Assist Kit - https://mwlaser.com.au/product/ultimate-air-assist-kit/

Z-Axis Auto Focus Sensor / Limit Switch Pen - https://mwlaser.com.au/product/cloudray-auto-focus-focusing-sensor-z-axis/

Cloudray Analog Ammeter (Available in 0-30mA and 0-50mA) https://mwlaser.com.au/product/cloudray-30-50ma-ammeter/

The Mechanical parts I used for this Laser Build are from Cloudray - This set below is for the size I am building 1300x900mm cutting area. It comes with all mechanical components, laser lens head, mirror mounts, tube mounts stepper motor mounts, axis rails and timing belt.

http://s.click.aliexpress.com/e/CcVFEAla - Product - Cloudray Mechanical Parts Set 1300*900mm Inner Sliding Rails Kits Spare Parts for DIY 1390 CO2 Laser Engraving Cutting Machine

Thanks for Visiting.
Until next time, take care
Cheers Matthew
Visit Matt's Workshop at NEW WEBSITE: https://www.mwlaser.com.au
Instagram https://www.instagram.com/mattsworkshop/
Facebook https://www.facebook.com/mattsworkshopau

== If you'd like to support my channel financially so I can continue to produce content you can do via PayPal here --- https://www.paypal.me/mattsworkshop --- Thank You ====

NOTE: This is not a paid production or advertisement. The featured products are provided by Cloudray to allow me to provide viewers with an installation / how-to video.

Видео 06 Build Your Own Laser - Wiring of Components канала MW Laser