Cutting Bowl Blanks For My Lathe On My Woodland Mills Sawmill and a Bowl Blowup
If you watch many woodturning videos,, you've seen turners cutting bowl blanks from logs with chainsaws. I've done, that, too, but it's noisy, and long, stringy chips sometimes clog the saw.
I have a few logs suitable for blanks, and I plan to saw them as logs on the sawmill, two cuts, one above the pith and the other below. Then I'll cut them to length with the chainsaw.
But I had a few logs already cut to blank length, and I thought it wouldn't be difficult to rip them on the sawmill, too.
I turned a bowl from one of them the next day. Well, half a bowl anyway. Here is the link to that.
https://youtu.be/L5-dibiuBlI
If you want to subscribe to both channels, subscription to one does not cross over to the other. You have to subscribe to each separately. All subs are appreciated, of course.
My woodturning channel
https://www.youtube.com/channel/UCkVInzCEKerslv6OAylxPvw
My web site
https://www.ericrush.com/
My Etsy shop
https://www.etsy.com/shop/EricRushWOODTURNING
Видео Cutting Bowl Blanks For My Lathe On My Woodland Mills Sawmill and a Bowl Blowup канала Oregon Old Timer
I have a few logs suitable for blanks, and I plan to saw them as logs on the sawmill, two cuts, one above the pith and the other below. Then I'll cut them to length with the chainsaw.
But I had a few logs already cut to blank length, and I thought it wouldn't be difficult to rip them on the sawmill, too.
I turned a bowl from one of them the next day. Well, half a bowl anyway. Here is the link to that.
https://youtu.be/L5-dibiuBlI
If you want to subscribe to both channels, subscription to one does not cross over to the other. You have to subscribe to each separately. All subs are appreciated, of course.
My woodturning channel
https://www.youtube.com/channel/UCkVInzCEKerslv6OAylxPvw
My web site
https://www.ericrush.com/
My Etsy shop
https://www.etsy.com/shop/EricRushWOODTURNING
Видео Cutting Bowl Blanks For My Lathe On My Woodland Mills Sawmill and a Bowl Blowup канала Oregon Old Timer
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Our Best Day of Crabbing, Ever!Dory Maintenance Eight Years In, Part 3Dragging Down the Long LogDory Maintenance Eight Years In, Part 2Dory Maintenance Eight Years In, Part 1Crabbing Again on Netarts BaySummer Projects and Not Enough SummerDeck Extension Part 8, Finally FinishedDeck Extension Part 7Laguna Revo 12/16 First Year Lathe ReviewDeck Extension Part 6Deck Extension Part 5A Sunny Spring Day at the SawmillDeck Extension Part 4Deck Extension Part 3Snow Day! Yippee? I don't think so...Deck Extension Part 2Deck Extension Part 1Okay, I Believe You! Adjusting Idle on my Woodland Mills SawmillCutting Down Nuisance Trees Before the Rest of Them Fall Down