Remove and Install Control Switch - Stark VARG

How to change the Gear Oil on the Stark VARG 🐺⚡️
Official Technical Tutorial.

▶️ Removal Process.
- Remove front number plate
- Remove number plate bolt
- Remove number plate up and outward
- Work the brake line out of the brackets
- Remove junctionbox lid
- Loosen connectors
- Disconnect the plugs
- Remove rubber strap
- Hold switch and remove clamp bolt
- Remove switch

▶️ Assembly Process.
- Hold the switch in place and tighten clamp bolt to 5 Nm
- Slide the cable through the triple clamp
- Connect the plugs
- Clip connectors onto the junctionbox
- Tighten junctionbox bolts
- Fit rubber strap
- Install front number plate
- Fit the brake line in the number plate brackets
- Slide the number plate in the front fender slots
- Tighten front number plate bolt to 8 Nm

#StarkVARG #TechnicalTutorial #EngineeredByRidersForRiders

Learn more and order your VARG here:
@
Observe your local health and safety guidelines. Ensure a safe working environment. Wear appropriate protective gear. Deviating from the prescribed order may result in injury or damage to the products.

Видео Remove and Install Control Switch - Stark VARG канала Stark Future Official