Remove and Install Pull Rod - Stark VARG

Steps:

*** REMOVAL ***

- Remove the rear brake pedal
- Hold spring
- Loosen brake pedal link bolt
- Remove sway bolt
- Remove pedal
- Remove chain
- Remove chain link
- Run the chain through the front sprocket
- Remove chain slider bolt
- Remove pull rod lock nuts
- Pull bolts out
- Remove pull rod

*** INSTALLATION ***

- Hold pull rod in place
- Insert the bolts
- Tighten lock nuts to 60 Nm
- Tighten chain slider bolt to 5 Nm
- Install chain
- Run the chain through the front sprocket
- Install chain link
- Install rear brake pedal
- Install pedal
- Tighten sway bolt to 20 Nm
- Install the brake pedal link
- Tighten link bolt to 10 Nm
- Check brake operation before operating the bike

Видео Remove and Install Pull Rod - Stark VARG канала Stark Future Official