Remove and Install Charging Port - Stark VARG

How to Remove and Install Charging Port on the Stark VARG 🐺⚡️
Official Technical Tutorial.

▶️ Removal Process.
Remove the spoiler assembly.
Disconnect the CAN BUS connector.
Install the protective cover onto the CAN BUS socket on the battery.
Disconnect the battery power plug.
Install the protective cover onto the power socket on the battery.
Disconnect the charging port sockets.
Untighten the charging port bolts.
Remove the charging port.

▶️ Assembly Process.
Place the charging port in place.
Tighten the charging port bolts to 5 Nm.
Connect the charging port sockets.
Please take all the necessary precautionary measures to handle high voltage components.
High voltage components should only be handled by qualified personnel.
Remove the protective cover onto the power socket on the battery.
Connect the battery power plug.
Remove the protective cover onto the CAN BUS socket on the battery.
Connect the CAN BUS connector.
Install the spoiler assembly.

#StarkVARG #TechnicalTutorial #EngineeredByRidersForRiders

Timecodes:
0:00 - Intro
0:07 - Removing the Spoiler Assembly.
0:32 - Disconnecting the Battery.
0:54 - Removing the Charging Port
1:26 - Installing the Charging Port
1:49 - Reconnecting the Battery.
2:02 - Installing the Spoiler Assembly
Learn more and order your VARG here:
@
Observe your local health and safety guidelines. Ensure a safe working environment. Wear appropriate protective gear. Deviating from the prescribed order may result in injury or damage to the products.

Видео Remove and Install Charging Port - Stark VARG канала Stark Future Official