Changing Gear Oil Honda 75/90hp Outboard

**** ALL SCREWS ARE RIGHTY TIGHTY LEFTY LOOSIE **** Due to filming some shots in selfie mode and producing these all on my cell phone some images may be backwards.

This video is the how to change your gear oil at home for your Honda 75/90 hp outboard. Now almost every Honda is the same to change. Same locations just different o-rings or washers. So don't worry. Other motor brand may have them hidden like Mercury will have the lower drain screw behind the prop or Yamaha under the intake screen. So keep that in mind if you are working on one of them. The only trouble you will have is if someone has mangled the screw head before you get there. I will show you that special tool and others that will help in this video. Is it a professional video? No, but I try to be as much as possible. Have I been trained to work on these? Yes, by Honda and I have been doing these for 20 years now. Your gonna be Ok!
The O-ring shown in the video which is used on almost every Honda now a days is
O-ring 91301-ZW4-003
When this number for the o-ring is superseded some day this old one will take you to it.
Our other Washer is this one.
Plastic Washer 90507-921-000
This to is the clear plastic gasket I showed you. Remember try to use what is recommended for your motor. In a pinch look at the seating area on the gearcase and the screw. Will the gasket you pick work? That's all. Remember to lots of motors take different gear oil. Both of these and all the Honda's took 80w-90. Good luck with your oil change and don't hesitate to contact me if you run into trouble. Keep the ground clean and recycle your used oil. Thanks for watching!

Видео Changing Gear Oil Honda 75/90hp Outboard канала Captain Rob Thompson