Everything you need to know about thickness-planer snipe
Everyone with a thickness planer asks this question at some point. My intent with this video was to explain the causes and solutions well enough that snipe never really causes you much trouble again.
I put a lot more work into video production that I normally do, using a new audio setup, ultra-high-definition video, a lot more time preparing and processing, and I sacrificed a few beautiful pieces of wood to the planer so you could see what was going on inside. If you find it helpful, please consider supporting the channel by liking, subscribing, and sharing with other people who might find the information useful.
This is the link to the end-grain-cutting-board video I mentioned at the end: https://youtu.be/IOzc1AA3a8Q
You can also find pictures of stuff I build on Instagram at https://www.instagram.com/thesnekkershow/.
Chapters
0:00 What is snipe?
1:36 How machine design affects snipe
4:57 Proper infeed and outfeed support
7:12 Do the infeed/outfeed tables need to be flush or sloped?
11:11 Prepare your boards for reduced snipe
16:30 Sacrificial boards
19:49 Plan your plane train
22:37 Just cut off the snipe
23:40 Recap and conclusion
Technical information:
Video: Galaxy S10E cellphone at 4k 60fps
Audio: Rode Wireless Go and Rode lavalier microphone
Editing: PowerDirector 18
Planer: DeWalt DW735 with a Shelix cutterhead
Woods fed to the planer: Red oak, ambrosia maple, birch, and pear. Can you identify which was which?
Makeup and hair: Asked to remain anonymous, but they promised not to bill me if I dropped the charges
It's pretty far down in the description, is anybody still reading this? I hope you're having a great day, and I hope you're doing everything you can to prevent the spread of coronavirus. One day this will all be over and you'll want to remember that you were part of the solution, not part of the problem.
Видео Everything you need to know about thickness-planer snipe канала The Snekker Show
I put a lot more work into video production that I normally do, using a new audio setup, ultra-high-definition video, a lot more time preparing and processing, and I sacrificed a few beautiful pieces of wood to the planer so you could see what was going on inside. If you find it helpful, please consider supporting the channel by liking, subscribing, and sharing with other people who might find the information useful.
This is the link to the end-grain-cutting-board video I mentioned at the end: https://youtu.be/IOzc1AA3a8Q
You can also find pictures of stuff I build on Instagram at https://www.instagram.com/thesnekkershow/.
Chapters
0:00 What is snipe?
1:36 How machine design affects snipe
4:57 Proper infeed and outfeed support
7:12 Do the infeed/outfeed tables need to be flush or sloped?
11:11 Prepare your boards for reduced snipe
16:30 Sacrificial boards
19:49 Plan your plane train
22:37 Just cut off the snipe
23:40 Recap and conclusion
Technical information:
Video: Galaxy S10E cellphone at 4k 60fps
Audio: Rode Wireless Go and Rode lavalier microphone
Editing: PowerDirector 18
Planer: DeWalt DW735 with a Shelix cutterhead
Woods fed to the planer: Red oak, ambrosia maple, birch, and pear. Can you identify which was which?
Makeup and hair: Asked to remain anonymous, but they promised not to bill me if I dropped the charges
It's pretty far down in the description, is anybody still reading this? I hope you're having a great day, and I hope you're doing everything you can to prevent the spread of coronavirus. One day this will all be over and you'll want to remember that you were part of the solution, not part of the problem.
Видео Everything you need to know about thickness-planer snipe канала The Snekker Show
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The video I wish I watched before buying a Shelix (video version 2)94 - Jointer & Planer, Exactly How to Use Them, What They Are, What They Do, Why You Might Need BothCutting Board 101Reduce Planer Snipe | Making a New Compact Planer Bed for the Thickness PlanerScrap-wood end-grain cutting boardTools you DON'T need: Jointer vs Planer vs Drum sanderBEGINNERS Guide to Using an Electric Planer.How to Make a Simple Planer Sled for Flattening Wide BoardsBest Benchtop Thickness Planer ~ Head-to-HeadImproving a Portable Planer (minimize snipe)How To Edge Plywood - You've been doing it WRONG !Dewalt DW735 DW734 ComparisonDeWalt DW735 planer vs. a cheap one (review)Say Goodbye To Snipe - Thickness Planer Jig // WoodworkingCare and Feeding the DeWalt DW735 Thickness PlanerThickness Planer Tune Up and MaintenanceStraight, Flat Boards, No Jointer!!!Planer Upgrade (DW735 + Shelix)6 Ways to Reduce Planer Snipe5 Quick Thickness Planer Hacks - Woodworking Tips and Tricks