An INSIDE Look - 6 Second Chassis Planning - 55 Build - Video 4
A HUGE Thank You to these great companies for being a part of the build!
IDIDIT:
https://www.ididitinc.com
Summit:
https://www.summitracing.com/parts/mbt-400-530
Holley Performance:
Dominator ECU (#554-114)- https://www.holley.com/products/fuel_systems/fuel_injection/dominator_efi/dominator_ecu/parts/554-114
Pro 600 (#8000)-
https://www.holley.com/products/ignition/ignition_boxes/drag_racing/parts/8000
Coil Packs (#82808)- https://www.holley.com/products/ignition/ignition_coils/race/parts/82808
12.3" Stand Alone Pro Dash (#553-116)-
https://www.holley.com/products/data_acquisition/digital_dashes/digital_dashes/parts/553-116
EGT Sensors (#554-186)- https://www.holley.com/products/fuel_systems/fuel_injection/modules_and_sensors/holley_efi_can_egt/parts/554-186
Cam Sync Plug (#85141)- https://www.holley.com/products/ignition/distributors/chevrolet/cam_sync/parts/85141
The crazy part about a build, that is often over looked, is how much time is ACTUALLY spent sitting, thinking, and planning. We did a lot of that on this car, when it came to the chassis, because we need it to not only meet SFI specifications for safety... but to also be useable for it's multi purpose of track and street use! In this video, I go over the process we went through to decide measurements and pick locations and layout of the bars in the chassis. Then, make the first bend and get the first bar, the base for EVERYTHING else, in. Plus, unbox some Holley Performance goodies with me!
Build Shirts:
https://www.alextaylorracing.com/shop/questforthe6s
Alex's IG: @alextaylorracing
DT's IG: @dennistaylor522
Alex's FB: Alex Taylor Racing
Видео An INSIDE Look - 6 Second Chassis Planning - 55 Build - Video 4 канала Riding With Alex Taylor
IDIDIT:
https://www.ididitinc.com
Summit:
https://www.summitracing.com/parts/mbt-400-530
Holley Performance:
Dominator ECU (#554-114)- https://www.holley.com/products/fuel_systems/fuel_injection/dominator_efi/dominator_ecu/parts/554-114
Pro 600 (#8000)-
https://www.holley.com/products/ignition/ignition_boxes/drag_racing/parts/8000
Coil Packs (#82808)- https://www.holley.com/products/ignition/ignition_coils/race/parts/82808
12.3" Stand Alone Pro Dash (#553-116)-
https://www.holley.com/products/data_acquisition/digital_dashes/digital_dashes/parts/553-116
EGT Sensors (#554-186)- https://www.holley.com/products/fuel_systems/fuel_injection/modules_and_sensors/holley_efi_can_egt/parts/554-186
Cam Sync Plug (#85141)- https://www.holley.com/products/ignition/distributors/chevrolet/cam_sync/parts/85141
The crazy part about a build, that is often over looked, is how much time is ACTUALLY spent sitting, thinking, and planning. We did a lot of that on this car, when it came to the chassis, because we need it to not only meet SFI specifications for safety... but to also be useable for it's multi purpose of track and street use! In this video, I go over the process we went through to decide measurements and pick locations and layout of the bars in the chassis. Then, make the first bend and get the first bar, the base for EVERYTHING else, in. Plus, unbox some Holley Performance goodies with me!
Build Shirts:
https://www.alextaylorracing.com/shop/questforthe6s
Alex's IG: @alextaylorracing
DT's IG: @dennistaylor522
Alex's FB: Alex Taylor Racing
Видео An INSIDE Look - 6 Second Chassis Planning - 55 Build - Video 4 канала Riding With Alex Taylor
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
A Chassis Built for the Sixes! Plus LOTS of New Parts to Help Get Us There! - 55 Build - Video 5Vegas Rat Rods Officially ENDED After This Happened... WHERE DID ALL THE WELDERUP EMPLOYEES GO?Tearing the 55 Down! Sick Week Prep Underway! (Car Wasn't Even Built this time Last Year!! 😱)Can DT YouTube?! Wheelie Bars and Trunk Lid Notch + Trunk Lid - 55 Build - Video 11Gasser Tips #3 #gasser buildDriving a Brand NEW Race Car Through the Rocky Mountains!! - Race Week 1.0 - Video 2Bars, Bars, Bars!! - 4/5 of the Chassis Done! - 55 Build - Video 6The Calm Before the Storm 😝 55 Build - Video 18So Many NICE Cars in One Spot (That YOU Could Win!) - Join me for a Dream Giveaway TourFab Ford 9 Inch Built ✅ Chassis (Almost) Complete ✅ Getting Closer to Assembly! - 55 Build - Video 9Mullet El Camino Build Episode 12.....Wiring Overview!!We Broke Well... a LOT of things 🥴 Day 3 - Sick Week 20223 Days to FINISH Quest for the Sixes 55 Build 😱 - Insane Amount of Work LeftCan You Even Believe This Is The SAME Car from Only TWO Weeks Ago?! - 55 Build - Video 3NOVA BUILD EPISODE #1 Chassis constructionAnnouncing Car Name! 🙌🏼 PLUS Q&A with Alex & Dennis - 55 Build - Video 8All the Fiberglass for the 55 Build! Doors, Bumpers, Front Clip, Trunk Lid - 55 Build - Video 72 Weeks Filming for MotorTrend + LOTS of 55 Updates !! - 55 Build - Video 12Trailer Shuffling and Sick Week Set Up (Fixing Last Minute Things on the 55!)