Fab Ford 9 Inch Built ✅ Chassis (Almost) Complete ✅ Getting Closer to Assembly! - 55 Build - Video 9
As always, a huge THANK YOU to these great companies!
Summit:
https://www.summitracing.com/parts/rhc-16-0002-60
Ididit:
https://www.ididitinc.com/i-30860335-steering-column-pro-lite-straight-universal-30-qrsh-6-bolt-oe-gm.html?ref=brand:102176
Send Cut Send:
https://sendcutsend.com
There was a lot going on in the shop this week, other than working on the 55, so this video was a little slower paced than I had hoped for! I have said it multiple times, but I'm going to say it again... we are getting ready to start moving fast and you'll be able to see some big changes! The last few weeks have been the smaller details to finish up, like on the chassis. The small details that you don't initially see a change in, but make the biggest difference and are the finishing touches to move on to something new. This weekend I'll be pulling the Nova apart (sad face) so I can take it's engine and trans and get it ready for the 55 while dad works on suspension for the 55. Then, on Wednesday I leave for LS Fest West in Vegas, which is going to be so much fun!
Build Shirts:
https://www.alextaylorracing.com/shop/questforthe6s
IG: @alextaylorracing
DT IG: @dennistaylor522
Facebook: Alex Taylor Racing
Видео Fab Ford 9 Inch Built ✅ Chassis (Almost) Complete ✅ Getting Closer to Assembly! - 55 Build - Video 9 канала Riding With Alex Taylor
Summit:
https://www.summitracing.com/parts/rhc-16-0002-60
Ididit:
https://www.ididitinc.com/i-30860335-steering-column-pro-lite-straight-universal-30-qrsh-6-bolt-oe-gm.html?ref=brand:102176
Send Cut Send:
https://sendcutsend.com
There was a lot going on in the shop this week, other than working on the 55, so this video was a little slower paced than I had hoped for! I have said it multiple times, but I'm going to say it again... we are getting ready to start moving fast and you'll be able to see some big changes! The last few weeks have been the smaller details to finish up, like on the chassis. The small details that you don't initially see a change in, but make the biggest difference and are the finishing touches to move on to something new. This weekend I'll be pulling the Nova apart (sad face) so I can take it's engine and trans and get it ready for the 55 while dad works on suspension for the 55. Then, on Wednesday I leave for LS Fest West in Vegas, which is going to be so much fun!
Build Shirts:
https://www.alextaylorracing.com/shop/questforthe6s
IG: @alextaylorracing
DT IG: @dennistaylor522
Facebook: Alex Taylor Racing
Видео Fab Ford 9 Inch Built ✅ Chassis (Almost) Complete ✅ Getting Closer to Assembly! - 55 Build - Video 9 канала Riding With Alex Taylor
Показать
Комментарии отсутствуют
Информация о видео
16 апреля 2021 г. 22:01:02
00:36:47
Другие видео канала
Forgotten 1968 Pontiac Firebird - Will it RUN AND DRIVE 700 MILES?All the Fiberglass for the 55 Build! Doors, Bumpers, Front Clip, Trunk Lid - 55 Build - Video 7Cross-Country Road Trip in The Biggest Chevy Square Body Ever! Part 1: Finnegan's Garage Ep.142WILL PAINTS A CAR BEHIND MARK'S BACK!FULL REBUILD: Upgrading A 1970 Dodge Challenger Restomod From The Inside OutAssembling the Short Block! + Tech Tips from The Old Man!Weekend Paint Job! - Painting Kym and Jim Fissel's AngliaBadmaro & RetroNova made some FAST passes... Until misfortune struck. BUT WE'LL BE BACK! - DW Part 2Too much POWER! 3 Rotor Half Mile burnouts in every gearVisiting Aaron Kaufman at Arclight Fab & Full Shop & Truck Tour | Ford EraSand Casting a Die to Bend Tube for a Chassis - Because The One We Needed was Backordered!My FIRST Time On an Oval Asphalt Track! - AND I Drove a New C8 - Practice for 2.4 Hours of LeMulletsHOUSTON MUSCLE CAR RESCUE!!!Turbo Diesel Ramp Truck Road Trip Pt.2: Truckstop Aliens and drag boats-Finnegan's Garage Ep.143NO BULLSH*T RACING NA CLASS BERKELEY SPRINGS WV AIRPORT APRIL 2021Phoenix new rods bearings & wheels alignment!!A Chassis Built for the Sixes! Plus LOTS of New Parts to Help Get Us There! - 55 Build - Video 5Mullet El Camino Build Episode 21!! Contortionist Welding and Painting!I finally Drive my McLaren 720s - Episode 21Is The Burnout Truck Salvageable After The Fire???