A Chassis Built for the Sixes! Plus LOTS of New Parts to Help Get Us There! - 55 Build - Video 5
A HUGE thank you to these great companies for being a part of the build!!
https://www.summitracing.com
https://www.ididitinc.com
Injectors (#16S-13-2200-8):
https://deatschwerks.com/products/16s-13-2200-8?_pos=1&_sid=68827e68a&_ss=r
Turbos:
https://www.precisionturbo.net/Street-and-Race/ss/2-000--HP/details/Street-and-Race-Turbocharger-–-GEN2-PRO-MOD-102-CEA-W--103mm-TW/658
DriveShaft
https://www.qa1.net/automotive/driveshafts/custom-rev-series-carbon-fiber-driveshafts
BUILD SHIRTS:
https://www.alextaylorracing.com/shop/questforthe6s
I can already see the sixes now! So much progress over about a 10 day period. We went from no chassis or structure to a jungle gym inside the car... but that's a GREAT thing! We got most of the back half wrapped up and got a considerable amount of headway made on the inside of the car. Next will be wrapping that up and moving out from when struts arrive. Dad said, "I'm going to work my way out of job at this rate!" But hey, that's what I like to hear! Make sure to check back next week to see some more progress!
IG: @alextaylorracing
DT's IG: @dennistaylor522
Facebook: Alex Taylor Racing
Видео A Chassis Built for the Sixes! Plus LOTS of New Parts to Help Get Us There! - 55 Build - Video 5 канала Riding With Alex Taylor
https://www.summitracing.com
https://www.ididitinc.com
Injectors (#16S-13-2200-8):
https://deatschwerks.com/products/16s-13-2200-8?_pos=1&_sid=68827e68a&_ss=r
Turbos:
https://www.precisionturbo.net/Street-and-Race/ss/2-000--HP/details/Street-and-Race-Turbocharger-–-GEN2-PRO-MOD-102-CEA-W--103mm-TW/658
DriveShaft
https://www.qa1.net/automotive/driveshafts/custom-rev-series-carbon-fiber-driveshafts
BUILD SHIRTS:
https://www.alextaylorracing.com/shop/questforthe6s
I can already see the sixes now! So much progress over about a 10 day period. We went from no chassis or structure to a jungle gym inside the car... but that's a GREAT thing! We got most of the back half wrapped up and got a considerable amount of headway made on the inside of the car. Next will be wrapping that up and moving out from when struts arrive. Dad said, "I'm going to work my way out of job at this rate!" But hey, that's what I like to hear! Make sure to check back next week to see some more progress!
IG: @alextaylorracing
DT's IG: @dennistaylor522
Facebook: Alex Taylor Racing
Видео A Chassis Built for the Sixes! Plus LOTS of New Parts to Help Get Us There! - 55 Build - Video 5 канала Riding With Alex Taylor
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Full Build: Turning A 1974 Dodge Dart Into A Pro Street MoparTX2K21 Day 3 - Mistakes Were Made... Ruby SLAMS Down From a HUGE Power Wheelie!Sand Casting a Die to Bend Tube for a Chassis - Because The One We Needed was Backordered!2JZ Lawn Mower Engine Rebuild + Racecar Parts!Buying an excavator auger attachmentAn INSIDE Look - 6 Second Chassis Planning - 55 Build - Video 4RUSTY OLD FLAT TWIN ENGINE RESTORATIONWeekend Paint Job! - Painting Kym and Jim Fissel's AngliaWe Hired a Car Hauler and His Truck Was Cooler Than Our 1,500hp Burnout Cars... (INSANE Peterbilt)3000hp, 6 Second Street Driven ’56 Chevy With Twin Turbos and Steel panelsI Inherited A 1958 GMC Bus!Fastest Street Car In The World Calls Out A Top Fuel Dragster2021 Race Season Not Starting Off Good. New Murder Nova is Broke From Front to Back!First Drive of My Body-Dropped, LT-Swapped Chevy C10: Finnegan's Garage Ep.138Its Time To Drain The Swamp!Vice Grip Garage Independence Chevelle gets some tin!TX2K21 Day 1 - James' Nova Makes Its First Pass In SEVEN Years... It Did NOT Disappoint!!!Mullet El Camino Build Episode 16! The Final Assembly Process Begins!!!!GMC Cabover BuildFREE Chevy S10 Pickup Will It Run and Drive after many years? | Part 1