Too lazy to DIY? GEPRC Hero 8 vs. Insta360 SMO 4k
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
If you don't want to DIY your own "naked" GoPro, here are two options: GEPRC has made a "naked" Hero 8, and Insta360 has partnered with BetaFPV to make the SMO 4k. Which is better? Let's find out.
--- PRODUCT LINKS ---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the GEPRC Hero 8 (pre-made) at:
* https://bit.ly/3jRKaYJ
Want to make your own? The GEPRC naked Hero 8 case is:
* https://bit.ly/3AFFQBR
Buy the SMO4k at:
* RaceDayQuads - https://bit.ly/3dRbToT
* DefianceRC - https://bit.ly/2TKfVbF
* UnmannedTech UK - https://bit.ly/3yvRQEb
All of the above links are in stock at time of video release. The SMO 4k is listed at other stores, but is out of stock. And I'm not sure whether BetaFPV / Insta360 plan to make more. So I'm not spamming a bunch of links that may never be in stock.
--- TABLE OF CONTENTS ---
0:00 - Intro and commercial disclaimer
https://youtu.be/bFJsuN3X168 - How to make your own "Naked" GoPro Hero 6 using the BetaFPV naked kit. The Hero 8 process is similar but not exactly the same.
1:29 - GoPro is clearly the one to beat here
3:58 - GEPRC naked Hero 8 unboxing
4:39 - GEPRC naked BEC board
6:01 - Insta360 SMO 4k unboxing
6:14 - Weight comparison
6:23 - Soldering up the power wire
Aux switch video will be here when it releases. For now this is just a placeholder.
8:01 - Insta360 smartphone app
Details on the "misleading resolution" issue with Insta360 - https://www.youtube.com/watch?v=tiJ6Iq4l6dg&t=541s
10:18 - GoPro smartphone app
For more info about GoPro labs firmware:
https://community.gopro.com/t5/en/Introducing-GoPro-Labs/ta-p/603173
GoPro BLE Remote app:
https://play.google.com/store/apps/details?id=ch.jaromeyer.gopro_ble_remote&hl=en_US&gl=US
13:18 - Why "naked" cameras are bad for freestyle
14:36 - GoPro flight footage
16:12 - Insta360 SMO 4k post-capture workflow
17:37 - SMO 4k flight footage
20:09 - Still image comparison
22:22 - Conclusion: Which one should you buy?
Видео Too lazy to DIY? GEPRC Hero 8 vs. Insta360 SMO 4k канала Joshua Bardwell
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/
---
If you don't want to DIY your own "naked" GoPro, here are two options: GEPRC has made a "naked" Hero 8, and Insta360 has partnered with BetaFPV to make the SMO 4k. Which is better? Let's find out.
--- PRODUCT LINKS ---
I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
Buy the GEPRC Hero 8 (pre-made) at:
* https://bit.ly/3jRKaYJ
Want to make your own? The GEPRC naked Hero 8 case is:
* https://bit.ly/3AFFQBR
Buy the SMO4k at:
* RaceDayQuads - https://bit.ly/3dRbToT
* DefianceRC - https://bit.ly/2TKfVbF
* UnmannedTech UK - https://bit.ly/3yvRQEb
All of the above links are in stock at time of video release. The SMO 4k is listed at other stores, but is out of stock. And I'm not sure whether BetaFPV / Insta360 plan to make more. So I'm not spamming a bunch of links that may never be in stock.
--- TABLE OF CONTENTS ---
0:00 - Intro and commercial disclaimer
https://youtu.be/bFJsuN3X168 - How to make your own "Naked" GoPro Hero 6 using the BetaFPV naked kit. The Hero 8 process is similar but not exactly the same.
1:29 - GoPro is clearly the one to beat here
3:58 - GEPRC naked Hero 8 unboxing
4:39 - GEPRC naked BEC board
6:01 - Insta360 SMO 4k unboxing
6:14 - Weight comparison
6:23 - Soldering up the power wire
Aux switch video will be here when it releases. For now this is just a placeholder.
8:01 - Insta360 smartphone app
Details on the "misleading resolution" issue with Insta360 - https://www.youtube.com/watch?v=tiJ6Iq4l6dg&t=541s
10:18 - GoPro smartphone app
For more info about GoPro labs firmware:
https://community.gopro.com/t5/en/Introducing-GoPro-Labs/ta-p/603173
GoPro BLE Remote app:
https://play.google.com/store/apps/details?id=ch.jaromeyer.gopro_ble_remote&hl=en_US&gl=US
13:18 - Why "naked" cameras are bad for freestyle
14:36 - GoPro flight footage
16:12 - Insta360 SMO 4k post-capture workflow
17:37 - SMO 4k flight footage
20:09 - Still image comparison
22:22 - Conclusion: Which one should you buy?
Видео Too lazy to DIY? GEPRC Hero 8 vs. Insta360 SMO 4k канала Joshua Bardwell
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Betaflight 4.3 Motors Tab | COMPLETE WALKTHROUGH PART 5So you bricked your TBS Crossfire Tango Mambo Tracer? Now what?Winning Whoop racers use Betaflight crash_recovery. Should you?BLHeli32 ESC's just got a BIG performance upgrade. Here's how to get it.Betaflight 4.3 OSD Tab | COMPLETE WALKTHROUGH PART 10Betaflight 4.3 Failsafe Tab | COMPLETE WALKTHROUGH PART 8Five things BF 4.3 finally fixed. I can't wait for you to try them!Betaflight 4.3 Receiver Tab | COMPLETE WALKTHROUGH PART 3Betaflight 4.3 Ports Tab | | COMPLETE WALKTHROUGH PART 2Finally proper LQ and RSSI dBm in DJI OSD!!SPI-based ExpressLRS receivers are the worstScreen brightness on a knob? // EDGETX GLOBAL FUNCTIONS HOW-TOWhich gyro is on your FC?You CAN use FETTEC G4 with BLHeli32 // FULL SETUP GUIDEBetaflight 4.3 Configuration Tab and GPS Tab | COMPLETE WALKTHROUGH PART 6Discover the Power (annoyance) of ExpressLRS Model MatchI didn't waterproof my drone. Now I'm paying the price.How to pick the right BLHELI32 ESC in 2022 (don't miss out on the best feature!)Betaflight 4.3 Video Transmitter Tab | COMPLETE WALKTHROUGH PART 9Betaflight 4.2 OSD Disappeared & Upload Font Not WorkingFind YOUR perfect rates! With science!