Betaflight 4.3 Receiver Tab | COMPLETE WALKTHROUGH PART 3

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/

---

Watch all the videos in this series at: https://www.youtube.com/watch?v=LkBWRiEGKTI&list=PLwoDb7WF6c8nT4jjsE4VENEmwu9x8zDiE

For more info on setting up your receiver endpoints, channel map, and so forth: https://youtu.be/5ke6LabvtGM?t=2079
---

0:00 - Welcome to the Receiver Tab!
0:55 - Receiver Mode: Serial, PWM, PPM, SPI
3:26 - Serial Receiver Provider
4:22 - Channel position indicators
6:27 - RSSI ADC
8:35 - Why you usually shouldn't use RSSI ADC
9:50 - RSSI Channel
12:10 - How to tell if RSSI is working
13:00 - Channel Mapping
14:30 - Stick low and Stick high threshold
17:28 - Stick center and deadband
21:00 - Channel position graph and Preview 3D model
21:56 - RC Smoothing
23:54 - Next up: Aux modes!

Видео Betaflight 4.3 Receiver Tab | COMPLETE WALKTHROUGH PART 3 канала Joshua Bardwell