Betaflight 4.3 Video Transmitter Tab | COMPLETE WALKTHROUGH PART 9

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate-fpv-shopping-list

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/

---

Watch all the videos in this series at: https://www.youtube.com/watch?v=LkBWRiEGKTI&list=PLwoDb7WF6c8nT4jjsE4VENEmwu9x8zDiE
---

0:00 - Welcome to the Video Transmitter tab!
0:31 - If you're using DJI, this isn't relevant for you
0:54 - What are SmartAudio and Tramp Telemetry for?
2:35 - Which protocol does your vTX support?
3:45 - Current Values: vTX Type and Device Ready
5:17 - vTX Type: SmartAudio versions and unlocked vs. locked
5:59 - Current Values: Band, Channel, Frequency, Power
6:22 - Selected Mode: Band, Channel, Frequency, and Power
7:20 - Pit Mode, Pit Mode Frequency
10:03 - Low Power Disarm
11:41 - Why do vtxtable exist? Why doesn't Betaflight just do this automatically?
13:37 - vtxtable contents: Bands, Power Levels, Value, Label
15:21 - vtxtable contents: Factory vs. non-factory bands
16:41 - How to find the correct vtxtable for your video transmitter???

https://github.com/Jackjan4/betaflight-vtx-tables - Jackjan4 github repo of vtxtables
https://github.com/betaflight/betaflight/wiki/VTX-tables - Misc vtxtables at Betaflight wiki
https://vtx-tables.blogspot.com/ - Another web site archiving vtxtables

19:55 - How to load and save a JSON format vtxtable
21:35 - Save Lua Script button
22:15 - Next up! The OSD tab!

Видео Betaflight 4.3 Video Transmitter Tab | COMPLETE WALKTHROUGH PART 9 канала Joshua Bardwell