DON'T USE STANDARD HAMMERS!! Try This Instead...(Rip Claw Hammer Vs. Curved Claw Hammer--Which One?)

Check Out Our FREE GUIDE: *25 Must-Have Carpentry Tools...Under $25 Each!*
https://www.thehonestcarpenter.com/

AFFILIATE TOOL LINKS:
Vaughan Fiberglass 16 oz. Rip Claw:
https://amzn.to/3oU4CZS
Vaughan Wood 16 oz. Rip Claw:
https://amzn.to/3FRmFaf
Estwing 16 oz. Straight Rip Claw:
https://amzn.to/3cKmr8i
Estwing 16 oz. Rubber Grip Rip:
https://amzn.to/3cSTWFe
Estwing 20 oz. Rubber Grip Rip:
https://amzn.to/30XAu7U
Estwing 24 oz. Hammertooth Framing:
https://amzn.to/3nNS86W

(PLEASE NOTE: These are Amazon affiliate links. When you shop through these links, we receive a small commission at no extra charge to you. We greatly appreciate your support!)

Be sure to visit us at The Honest Carpenter Website:
www.thehonestcarpenter.com

CHECK OUT OUR OTHER TOOL-RELATED VIDEOS:
Circular Saw Rip Fence Guide:
https://youtu.be/b-I5LJtppuo
Best Removal Tool For Glued Flooring:
https://youtu.be/3FYaZQYC63w

DON'T USE STANDARD HAMMERS!! Try This Instead...(Rip Claw Hammer Vs. Curved Claw Hammer--Which One?)

Over the years, I've seen a lot of STANDARD HAMMERS in DIYers toolboxes. These curved claw hammers aren't bad--but they're rarely used by professionals in the field. This short video from The Honest Carpenter will explain a better hammer selection for construction/DIY work.

Standard hammers have curved claws on the back end. These are great for pulling nails, because the curved claw acts as a fulcrum the the nail pry.

But, standard/curved claw hammers aren't as effective for demolition work, because the fully curved claw is hard to drive into gaps and crevices.

Instead, the RIP CLAW hammer, also known as the STRAIGHT CLAW hammer, is far more effective for most construction work.

The flatter rip claw is like a pick that can be easily driven into gaps and crevices. It creates a LOT of prying power for demolition.

Rip claw hammers also tend to be better for driving nails, because they often come in heavier weights--16 oz. and upwards.

All framing hammers are Rip Claw (though they tend to be 20 oz. or more, which is too unwieldy for most DIYers.)

The 16 oz. rip hammer is the preferred hammer for many professional tradespeople. Though some trades doing more heavy nailing or prying may also prefer 20 oz. for regular work.

Thanks for watching!

The Honest Carpenter

Видео DON'T USE STANDARD HAMMERS!! Try This Instead...(Rip Claw Hammer Vs. Curved Claw Hammer--Which One?) канала The Honest Carpenter