Guide position setting. Tricot Warp Knitting Machine. Karl Mayer. design.트리코트 기계 가이드위치 조정(섬유 원단 니트)

Lesson 11 Explain How to Position the Warp Knitting Tricot Machine Guide.
You may not be able to express it properly because you used an English translator.
Hello, this is Choi Sang-don.
Let's see how to fit the basic guide.
All descriptions are based on the Kalmeier 28 gauge machine.
The width of one 28 gauge guide is 0.9mm, you can find the width of one guide with a 1 inch split gauge.
Therefore, the height of the tissue number 1 of the pattern wheel is 0.9mm, and when the tissue number 1 passes, one guide moves.
The ball bolt thread spacing of the slide assembly is 1mm, so the travel distance of one of the hexagons is 0.15mm and the guide travel is about 17%.
In order to move one guide space accurately, turn the hexagon of the hex bolt head at an angle of 5.4 to move the guide space accurately.
The aluminum bar contracts with changes in temperature, so when the temperature changes, the guide hits the bar.
That's why it is important to maintain a constant temperature in the field.
The guide is in the right place.
To change the position of the guide, first loosen the fixing bolt.
When the ball bolt is pushed back from the machine's forward position, the bolt is released and the guide moves to the left.
For Riva machines it is the opposite direction.
Conversely, pulling forward locks the bolt, so the pulling force of the push wire moves the guide in the correct direction.
This is also the opposite of the Riva machine...
When all adjustments are complete, lock the fixing bolts.
Let's see how the guide positions are aligned correctly.
Thank you.
제11강 트리코트 기계의 가이드 위치 조정 방법 설명.

Видео Guide position setting. Tricot Warp Knitting Machine. Karl Mayer. design.트리코트 기계 가이드위치 조정(섬유 원단 니트) канала Warp knitting Techniques