Parametric Cablechain in Fusion 360
Thingiverse link:
https://www.thingiverse.com/thing:5174726
See video for all parameters. I have also a bit angle taper on the connections, printing is a bit easier then. I print it without supports, there is some bridging then.
It's for the end user to check if the extrusion are good after changing the parameters, sometimes it can happen that there are warnings or wrong extrusions with extreme value's.
Видео Parametric Cablechain in Fusion 360 канала Gatze Tech
https://www.thingiverse.com/thing:5174726
See video for all parameters. I have also a bit angle taper on the connections, printing is a bit easier then. I print it without supports, there is some bridging then.
It's for the end user to check if the extrusion are good after changing the parameters, sometimes it can happen that there are warnings or wrong extrusions with extreme value's.
Видео Parametric Cablechain in Fusion 360 канала Gatze Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Make a Linux bootable USB in Windows & Linux | Rufus | Bios settings | From download ISO to test](https://i.ytimg.com/vi/GtzPUnZQsCk/default.jpg)
![Installing Linux | From Scratch | Dualboot](https://i.ytimg.com/vi/GzcdoF62Tn4/default.jpg)
![Python Tutorial from Scratch | Windows | From download to Hello World in a GUI and IDE](https://i.ytimg.com/vi/EOxabSS47Bs/default.jpg)
![Test Husqvarna 235 Chainsaw](https://i.ytimg.com/vi/r-_gT5RVY8Y/default.jpg)
![Diagnose and 'repair' a Lithium-Ion Battery | Low cell voltage](https://i.ytimg.com/vi/PYoGQZiGUrM/default.jpg)
![Tube|Pipe notch to sheetmetal flat pattern for production | Autodesk Inventor](https://i.ytimg.com/vi/TwaPUwnI01U/default.jpg)
![How much amps/current is required to start a diesel car ?](https://i.ytimg.com/vi/p-9nnkSNdMc/default.jpg)
![Arduino from Scratch | 2021 | From download to blinking led | Linux](https://i.ytimg.com/vi/4s6tNcQrV1w/default.jpg)
![Arduino from Scratch | 2021 | Installing Drivers | From download to blinking led | Windows](https://i.ytimg.com/vi/CMc7FUmFCCM/default.jpg)
![Modeling a PhoneCase in Fusion 360 with Pictures](https://i.ytimg.com/vi/u8Zu2Uct_YM/default.jpg)
![Testing the Akaso Brave 7 LE](https://i.ytimg.com/vi/gnWlNQXY-Fg/default.jpg)
![Python Tutorial from Scratch | Linux | From download to Hello World in a GUI and IDE](https://i.ytimg.com/vi/3J5IvFg2C54/default.jpg)
![Compiling VESC Firmware in Windows | IDE and Terminal | STM32Cube IDE | From scratch](https://i.ytimg.com/vi/0pzr2HbdVYc/default.jpg)
![Arduino Nano | 1 kHz interrupt based software PWM](https://i.ytimg.com/vi/4sXi9IEE-ZM/default.jpg)
![How much amps/current is required to start a tractor ?](https://i.ytimg.com/vi/HVGegLpU4RY/default.jpg)
![Helping on the Farm | Ford 6640 SLE](https://i.ytimg.com/vi/_vcI6NkLg1E/default.jpg)
![Assembling a clutch of a Stihl Brushcutter FS Serie](https://i.ytimg.com/vi/iuvYuj3DHXc/default.jpg)
![Programming a (bricked) VESC through SWD/STLink V2 | New STM32CubeProgrammer](https://i.ytimg.com/vi/Qvu0XfnnmYI/default.jpg)
![Make a Windows bootable USB in Linux | 2020 | Bios settings | Wimsplit | From download ISO to test](https://i.ytimg.com/vi/GXhHi262qhY/default.jpg)
![Installing Fusion 360 | 2020 | Solve Blurry Display Appearance](https://i.ytimg.com/vi/RgAXwkFu49o/default.jpg)