Ortur Laser - Change Barrels NOT Lens!
In this episode, we will be answering the top question which I get almost every day and that is about changing lens! While it sounds simple and is, there is I have come to discover there is a lot of confusion out there as many people think you need to "remove" the lens from the barrel and place it into the existing barrel! Please do not try this, you simply swap the barrels as I share in the video. It took me a bit to figure out this is what people are thinking and trying to do. So I hope this video helps explain things a bit better!
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Material for Laser Cutting:
Acrylic Sheets 6 Count 3mm: http://designstore.diy3dtech.com/Acrylic_Sheets_3mm
Diode Laser Lens:
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
Handy lens for thing stock: https://diy3dtech.com/G2-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
-Laser Air Assist: https://www.thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: https://amzn.to/3ld5CpA
-Slicone tubing for air assist: https://amzn.to/2Qd8xAh
-Small Air Compressor: https://amzn.to/3iZ5nfU
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
Видео Ortur Laser - Change Barrels NOT Lens! канала DIY3DTECH.com
Also be sure to check our Ortur Laser Resource Page: http://diy3dtech.com/ortur-laser-resource-page/
Our Preferred 450nm laser safety glasses: http://diy3dtech.com/Professional_Violet_Blue_Laser_Safety_Glasses
Material for Laser Cutting:
Acrylic Sheets 6 Count 3mm: http://designstore.diy3dtech.com/Acrylic_Sheets_3mm
Diode Laser Lens:
Must have G8 replacement lens: http://diy3dtech.com/G8-Laser-Lens
Handy lens for thing stock: https://diy3dtech.com/G2-Laser-Lens
3D Printable Ortur Large Format Laser Upgrade Parts:
-Leg Retainers: https://www.thingiverse.com/thing:4487570
-Cable Management: https://www.thingiverse.com/thing:4488811
-Laser Focus Knob: https://www.thingiverse.com/thing:4487510
-Laser Air Assist: https://www.thingiverse.com/thing:4575561
Other useful parts:
-9mm x 0.5mm lens barrel tap: https://amzn.to/3ld5CpA
-Slicone tubing for air assist: https://amzn.to/2Qd8xAh
-Small Air Compressor: https://amzn.to/3iZ5nfU
SVG Grid: http://diy3dtech.com/wp-content/uploads/2020/07/Ortur_Grid_02.zip
Ventilation Components:
-4 Inch Desktop Hood: https://amzn.to/3eETmcI
-4 Inch x 25 Foot Hose: https://amzn.to/2OyhXp1
-4 Inch Blast Gate: https://amzn.to/3eDxjDh
-4 Inch In-Line DC Fan: https://amzn.to/2CkUuFp
-4 Inch Adjustable Clamps: https://amzn.to/397sjWv
Preferred Control Software (LightBurn): https://lightburnsoftware.com/
Also if you want to learn more about laser safety, we have linked a PDF form Laser Vision which we recommend as well as their products too: http://diy3dtech.com/guide-to-laser-safety-glasses/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech
Видео Ortur Laser - Change Barrels NOT Lens! канала DIY3DTECH.com
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Ortur Laser - Can You Cut Harbor Freight Foam Floor Tiles!](https://i.ytimg.com/vi/LUcqz7Dr2xc/default.jpg)
![eBay K40 CO2 Laser - Post Mortem of High Voltage Lase Tube Failure!](https://i.ytimg.com/vi/Bvu3RJkzeZE/default.jpg)
![Ortur Laser - Is the G8 a Miracle Lens!](https://i.ytimg.com/vi/pY_7MC39qCY/default.jpg)
![▼ FREE ▼ Ortur Master II AIR ASSIST plus Z LIFT](https://i.ytimg.com/vi/m9faxWKwpkU/default.jpg)
![Ortur Laser - Upgrading Wattage with New Laser Module!](https://i.ytimg.com/vi/5BaetLOh6bM/default.jpg)
![How to Align and Center a Laser Project in 3 Easy Steps - Ortur Laser Master 2](https://i.ytimg.com/vi/A8kmyiNmHp8/default.jpg)
![Shop Talk - Fume Evacuation From Lasers and 3D Printers!](https://i.ytimg.com/vi/2HYl5sbR39I/default.jpg)
![Ortur Laser - Surprised Cutting Balsa Wood With Air Assist!](https://i.ytimg.com/vi/qxHTNTRqE58/default.jpg)
![What Can You Cut With This "15W" LASER Machine?](https://i.ytimg.com/vi/djRRxGXyACY/default.jpg)
![Ortur Laser Master 2 15 Watt looking for the "Sweet Spot" Using colors on Canvas](https://i.ytimg.com/vi/lZ6-MaMZjsk/default.jpg)
![▼ Why can't a DIODE laser cut thick materials? | KERF explained](https://i.ytimg.com/vi/5m63ofkama8/default.jpg)
![Ortur Laser - What You Need to Know About Laser Safety Glasses!](https://i.ytimg.com/vi/IAOdWgNtqKg/default.jpg)
![How to Make Money Making Wall Art with a Cheap Desktop Laser](https://i.ytimg.com/vi/5Gm6FVMaAgo/default.jpg)
![10 Tips and Tricks for New Laser owners that use LightBurn](https://i.ytimg.com/vi/svqLw94RjYQ/default.jpg)
![Ortur Laser - Detailed Build Instructions in Less Than 15 minutes!](https://i.ytimg.com/vi/q0geT09evDc/default.jpg)
![LightBurn Tips - Art Library How To!](https://i.ytimg.com/vi/3vWIaeHAb2Y/default.jpg)
![Ortur Laser Master 2 - 20W Engraver. Build, Test & Review.](https://i.ytimg.com/vi/wMw2vqhJEOk/default.jpg)
![The Kenny Hack: Photo Images On Glass. Ortur Diode Laser](https://i.ytimg.com/vi/Ubd_Q_9B27w/default.jpg)
![Ortur Laser - This is a Craft Show Money Maker!](https://i.ytimg.com/vi/Umgyle7NXqo/default.jpg)
![Cutting 10mm plywood with low budget Laser cutter](https://i.ytimg.com/vi/xb0Th7FBwNw/default.jpg)