▼ FREE ▼ Ortur Master II AIR ASSIST plus Z LIFT
Get your FREE Ortur Master II Air Assist plus Z Lift from Thingiverse: https://www.thingiverse.com/thing:4704160
Made for the Ortur Master II Laser Machine: http://gbe.st/302mPvP
In this video, I show how I mount the Air Assist that you can download for free from my website (3d printable STL file) on my Ortur Master II laser engraving machine.
By using the Air Assist unit the laser can cut and engrave deeper and faster, making the Ortur Master II much more versatile.
The Air-Assist can be printed with any properly calibrated 3D printer that can print PLA plastic. The layer height is 0.2mm and the files must be printed separately from each other. Especially the small clamp part should be printed slowly, otherwise, it will not fit. You may have to sand it to size.
I only offer the Air Assist as a file, and will NOT sell it or print it for others. My day-to-day work and family commitments do not allow me to spend time 3D printing for others. If you want the Air Assist, but you don't have a 3D printer, then use 3DHubs or go to a maker space in your own area, they can help you there.
The files will be shared under Creative Commons - Non-Commercial license
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
No additional restrictions — You may not apply legal terms or technological measures
The license prohibits application of effective technological measures, defined with reference to Article 11 of the WIPO Copyright Treaty.
NOTE: At a commercial print service, you can get the parts printed in PLA for less than 35,00 Euro shipped to your address. If you have to pay more, you are being ripped off !!!
At my local maker space, these parts would be made for approximately 12 to 15 Euro (no shipping).
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#3Dprinter #3Dprinting #XYZPrinting #3Dprintcreator
Thanks for watching this video.
Видео ▼ FREE ▼ Ortur Master II AIR ASSIST plus Z LIFT канала 3d-PrintCreator
Made for the Ortur Master II Laser Machine: http://gbe.st/302mPvP
In this video, I show how I mount the Air Assist that you can download for free from my website (3d printable STL file) on my Ortur Master II laser engraving machine.
By using the Air Assist unit the laser can cut and engrave deeper and faster, making the Ortur Master II much more versatile.
The Air-Assist can be printed with any properly calibrated 3D printer that can print PLA plastic. The layer height is 0.2mm and the files must be printed separately from each other. Especially the small clamp part should be printed slowly, otherwise, it will not fit. You may have to sand it to size.
I only offer the Air Assist as a file, and will NOT sell it or print it for others. My day-to-day work and family commitments do not allow me to spend time 3D printing for others. If you want the Air Assist, but you don't have a 3D printer, then use 3DHubs or go to a maker space in your own area, they can help you there.
The files will be shared under Creative Commons - Non-Commercial license
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material
The licensor cannot revoke these freedoms as long as you follow the license terms.
Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial — You may not use the material for commercial purposes.
No additional restrictions — You may not apply legal terms or technological measures
The license prohibits application of effective technological measures, defined with reference to Article 11 of the WIPO Copyright Treaty.
NOTE: At a commercial print service, you can get the parts printed in PLA for less than 35,00 Euro shipped to your address. If you have to pay more, you are being ripped off !!!
At my local maker space, these parts would be made for approximately 12 to 15 Euro (no shipping).
▼ If you want to buy me a nice cold drink, please do so:
http://support.3d-printcreator.com
▼ Subscribe to me on YouTube:
http://subscribe.3d-printcreator.com
▼ Find me on Thingiverse:
http://thingiverse.3d-printcreator.com
▼ Follow me on Twitter:
http://twitter.3d-printcreator.com
▼ Or on my website:
https://3d-printcreator.com/
Have any questions for me? Feel free to ask them here or on my other social media accounts.
Keywords for this video:
#3Dprinter #3Dprinting #XYZPrinting #3Dprintcreator
Thanks for watching this video.
Видео ▼ FREE ▼ Ortur Master II AIR ASSIST plus Z LIFT канала 3d-PrintCreator
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Fusion 360 Secrets: Laser-Ready SVG Files. Learn this in just 6 Minutes▼ What kind of laser is the WeCreate Vision?▼ Beaverlab DavCarve L1 Kickstarter All in One laserengraverDesigning Sauna Oil Holders With Lightburn▼ Review of the Algolaser AlphaMy Algolaser Alpha Review (There is also a long video)Wrong sensor for the job. DHT-11 not usable for in a sauna.Create With The Kingroon Kp3s Pro S1 3d Printer!▼ Fixing Alarm 8 in Lightburn | Easy Homing SolutionGet A Powerhouse Laser With The Atezr L2 24watt▼ Atezr L2 24Watt Laser Review🛠 Laser cutting Insulation material with the Creality Falcon 2📐engraving on different types of woodLet's Get Engraving With The Creality Falcon 2 Laser Engraver!☕ Rebuilding the studio, Have a break, drink Latte Macchiato▼ Creality Laser Falcon 2 announcement▼ Customize your production like a pro with LightBurn and a laser engraver▼ Why I am not upgrading to Simplify3D V5▼ Mastering the Zoom and Magnify Tools in Lightburn software▼ TwoTrees TR2 PRO Rotary roller▼ TwoTrees TR2 Pro Rotary Roller