Human Drone Interaction for Aerially Manipulated Drilling using Haptic Feedback IROS 2020
Published in: 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)
Citation:
D. Kim and P. Y. Oh, "Human-Drone Interaction for Aerially Manipulated Drilling using Haptic Feedback," 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Las Vegas, NV, USA, 2020, pp. 9774-9780, doi: 10.1109/IROS45743.2020.9340726.
Abstract:
This paper presents a concept for haptic-based human-in-the-loop aerial manipulation for drilling. The concept serves as a case study for designing the human-drone interface to remotely drill with a mobile-manipulating drone. The notion of the work stems from using drones to perform dangerous tasks like material assembly, sensor insertion while being vertically elevated from bridge, wind turbine, and power line. Presented is the aerial manipulator, the customized haptic drill press, the gantry-based test-and-evaluation platform design, material drilling results in the gantry, and validation-and-verification results for indoor flight trials.
Видео Human Drone Interaction for Aerially Manipulated Drilling using Haptic Feedback IROS 2020 канала profPaulOh
Citation:
D. Kim and P. Y. Oh, "Human-Drone Interaction for Aerially Manipulated Drilling using Haptic Feedback," 2020 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Las Vegas, NV, USA, 2020, pp. 9774-9780, doi: 10.1109/IROS45743.2020.9340726.
Abstract:
This paper presents a concept for haptic-based human-in-the-loop aerial manipulation for drilling. The concept serves as a case study for designing the human-drone interface to remotely drill with a mobile-manipulating drone. The notion of the work stems from using drones to perform dangerous tasks like material assembly, sensor insertion while being vertically elevated from bridge, wind turbine, and power line. Presented is the aerial manipulator, the customized haptic drill press, the gantry-based test-and-evaluation platform design, material drilling results in the gantry, and validation-and-verification results for indoor flight trials.
Видео Human Drone Interaction for Aerially Manipulated Drilling using Haptic Feedback IROS 2020 канала profPaulOh
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
skyCamInUnlvSurplusCenterQrCodeMonitoring093022legoCrank3BarDesigning Aerial Robot Sensor Suites to Account for Obscurants IROS 2007lilburd 050322 outdoorVIO wind - Visual Inertial Odometry with Small DroneskyCamInUnlvSurplusCenter093022legoComplexCranklegoCrankshaftMaterial Handling by Humanoid Robot While Pushing Carts Using a Walking Pattern Based on Capture PolegoSimpleCranklfp1 0 nxcLEGO 2D Planar Manipulator Arm with zero offset between rotational axeswfPidFile1_0a=(1.5,0,0)Avatar Darwin a Social Humanoid with Telepresence Abilities Aimed at Embodied Avatar Systems Humanbluetooth-MasterTransmitsStringsToSlave-033020wmv.wmvpcToMasterToSlaveSerialAndBluetoothCommunications 040220xl320 led 121419Immersive Auditory Visual Real Time Avatar System of ANA Avatar XPRIZE Finalist Avatar Hubo ARSO 2autoCTH012006Wmv - Autonomous Cruise-to-Hover Transition of a Fixed-Wing Aircraftpc to Master to Slave to XL320 demo 041620wfPidFile1 0a=0,0,0