Machining and Vertical Honing a Caterpillar Dozer track adjuster cylinder | Part 1

This video is Part 1 of repairing and replacing a Caterpillar D10 Dozer track adjuster cylinder that has been damaged. In this video we are machining and vertical honing the new track adjuster cylinder barrel. First we setup and machine the end off the old track adjuster cylinder on our TM-26120G lathe. Then machine up the new barrel by turning down the outer diameter and boring the internal diameter of the hollow bar. We finish up by using our Delapena Vertical Honing machine to finish hone the internal diameter of the cylinder barrel to spec ready for welding.

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: https://www.epidemicsound.com/referral/rccrvr/ #australianmachinist #machineshop #machinist

Видео Machining and Vertical Honing a Caterpillar Dozer track adjuster cylinder | Part 1 канала Cutting Edge Engineering Australia