Making a BIG Hydraulic Cylinder Rod & Eye | Part 2
This video is part 2 of a job we did to make a new BIG hydraulic rod and eye for a Hitachi EX1200-6 Excavator bucket cylinder. The rod has a lot of scratches and the eye is completely torn off the rod and has fatigue so we are making a whole new cylinder rod and eye. This shows the step by step process to make the new cylinder rod including machining and welding. We start with a 170mm diameter piece of MnVS6 induction hardened chrome bar and turn it into the hydraulic cylinder rod before fitting and welding on the new eye that we made in Part 1! First we rough machine down one end of the rod before welding silicon bronze on the cushion. Once it’s cooled we continue machining the rod in the lathe by turning down the silicon bronze and finish machining the end for the piston and nut. We cut a 3mm thread pitch external thread for the nut before flipping the rod to machine the other end. We machine a spigot to fit the rod eye and a taper for weld prep before fitting and tack welding the new rod eye in position. The eye is welded on using metal cored wire before cryo freeze shrink fitting the new bushing using liquid nitrogen. We finish the job by cleaning, wrapping and strapping the new rod and send it on it’s way to the customer.
Missed Part 1? Watch it here: https://youtu.be/MDx40qJd0zE
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
#australianmachinist #machineshop #machinist
Видео Making a BIG Hydraulic Cylinder Rod & Eye | Part 2 канала Cutting Edge Engineering Australia
Missed Part 1? Watch it here: https://youtu.be/MDx40qJd0zE
In this video we are using:
- TM-26120G Centre Lathe
- WIA 500i Weldmatic welder
Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe
To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/
About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!
Music: https://www.epidemicsound.com/referral/rccrvr/
#australianmachinist #machineshop #machinist
Видео Making a BIG Hydraulic Cylinder Rod & Eye | Part 2 канала Cutting Edge Engineering Australia
Показать
Комментарии отсутствуют
Информация о видео
7 мая 2021 г. 12:00:13
00:48:05
Другие видео канала
Line boring and Bore welding Caterpillar D10 Dozer push arm | Sir Meccanica WS2Swedish Gearbox Shaft Part 4: Keyways & the Reveal!Patent Remake: 1909 Ratchet WrenchWhen Daewoo 180 Excavator Comes to Truck Workshop for RepairingMachining Skills on Manual Lathe Turning 4140 Hardened SteelMaking a BIG Hydraulic Cylinder Rod & Eye | Part 1ONE OWNER CORVETTES!!!9.5" Inch 4140 Gearbox Shaft Part 1Replacing Damaged Hydraulic Cylinder Rod for Caterpillar D10 Bulldozer | Part 2New Inventions That Are At Another Level ▶38Hayabusa Pistons Part 1Machining a new Hydraulic Cylinder Head for CAT 651 Tractor Scraper | Part 1Machine Shaft From 2000 Lb StockLine boring and Bore welding Caterpillar 775 Truck rear strut rod | Sir Meccanica WS2Heavy Duty Machining Large Hydraulic Cylinder Rod for Hitachi Mining Excavator | Part 2Line Boring & Bore Welding Caterpillar 730 Dump Truck A-frame Eye | Part 2 | Sir Meccanica WS2Building a Mammoth Tusk jump without a single nail or power tool // Primal Trail pt. 3Machining a Part from Steel Hollow Bar for CAT 657 Scraper | Lathe Turning & BoringOld Detroit screams to life after 24 years!!! 65 year old crawler lives again!!!