Machining and Welding Silicon Bronze repair a Caterpillar Dozer track adjuster cylinder | Part 2

This video is Part 2 of repairing and replacing a Caterpillar D10 Dozer track adjuster cylinder that has been damaged. In this video we are machining and welding to repair the damaged track adjuster sleeve. First we machine down the damaged sleeve surfaces using our TM-1740G lathe before mig welding with silicon bronze to build up the machined steel surfaces. Then the sleeve goes back in the lathe for machining the silicon bronze back to spec. We also finish up completing the track adjuster cylinder barrel by welding the cap end onto the new barrel that we machined and honed in part 1.

Missed Part 1? Watch it here: https://youtu.be/q8uEfQYDy54

Join our channel:
We upload new videos every Friday at 5pm AEST! If you want to see more of our videos click LIKE & SUBSCRIBE! You can subscribe to our channel here: https://bit.ly/ceesubscribe

To see more follow us on online here:
Instagram https://instagram.com/cutting_edge_engineering
Facebook https://www.facebook.com/cuttingedgeengineeringaustralia/

About Us:
Our channel is all about showing you real life machining work from our workshop on the Gold Coast Australia. We specialize in manual machining, hydraulic repairs and heavy fabrication for the earth moving, mining and civil construction industries. So if you're a machinist that wants to see some big gear in action be sure to subscribe to our channel right now. We upload new videos every week that show lathe machining, milling, welding and all the good stuff that comes from a machining workshop. If that sounds like something that you would enjoy seeing, then make sure to join us by subscribing!

Music: https://www.epidemicsound.com/referral/rccrvr/

Видео Machining and Welding Silicon Bronze repair a Caterpillar Dozer track adjuster cylinder | Part 2 канала Cutting Edge Engineering Australia