- Популярные видео
- Авто
- Видео-блоги
- ДТП, аварии
- Для маленьких
- Еда, напитки
- Животные
- Закон и право
- Знаменитости
- Игры
- Искусство
- Комедии
- Красота, мода
- Кулинария, рецепты
- Люди
- Мото
- Музыка
- Мультфильмы
- Наука, технологии
- Новости
- Образование
- Политика
- Праздники
- Приколы
- Природа
- Происшествия
- Путешествия
- Развлечения
- Ржач
- Семья
- Сериалы
- Спорт
- Стиль жизни
- ТВ передачи
- Танцы
- Технологии
- Товары
- Ужасы
- Фильмы
- Шоу-бизнес
- Юмор
What is your drum tuning process? #shorts #short #snaredrum #snare #tuning #drumtuning #process
(🎧 recommend) (Read below)
People recently have been asking, “How do you get a good snare drum sound?”
The short answer is taking the time to learn how to tune drums. Drums do NOT make a sound by themselves. Someone has to turn tension rods & hit the drums to get them to make any sound.
Instead of putting aside time to learn, people think an expensive drum will fix their “bad-sounding drum” problems.
It will NOT.
For this to work, you must be willing to put in the time by taking your drum heads off, re-tuning, and repeating.
Ten thousand hours is only around 417 days. If you took an hour per 24-hour cycle to learn how to tune your drums, it would only take roughly 40 years to get those hours in. Assuming you only do an hour a day 😉.
I say all of that to say there is no “self-help book for drum tuning.” Even if there was, you can only get so far with it. You need to be willing to work to achieve the sound you desire for yourself and the music!
Never stop asking questions, experimenting, setting aside time, or digging for more. Your older self will appreciate that you put in the work now and not when it’s potentially too late.
Anyways, have a fantastic week. Love you, guys!! Okay. Byeeeee. 🥁🤓👊🏻❤️🙏🏻
—
DW Design Series 14” x 5.5” specs:
* Size: 14” x 5.5”
* Shell: 10 ply HVLT North American Maple shell (Vertical Low Timbre shell with a horizontal outer ply)
* Hoops: chrome plated 2.3 triple flanged hoops top and bottom
* Shell Finish: Finishply wrap
* Hardware Finish: Chrome hardware
* Configuration: 10 mini Turret lug configuration w/ true pitch tension rods
* Bearing edges: single 45° inner, with a rounded over outer.
* DW 20 strand wires
* MAG throw off, DW butt plate
* Drum heads: Remo Controlled Sound coated (batter), Ambassador Snare side (resonant)
—
#testabeatdrums #geargeek #drumheads #drumset #drums #drum #baterista #drumsultant #drummer #homestudio #tones #beastmode #microphones #drumheads #snaredrum #orlandodrumtech #orlandodrummer #trustyourears #florida #underdog #findyoursound #understandingdrums #keeponlearning #officialsnaregeek #dwdrums #drumtuning #tenthousandhours #time #design #maple
Видео What is your drum tuning process? #shorts #short #snaredrum #snare #tuning #drumtuning #process канала Nate Testa
People recently have been asking, “How do you get a good snare drum sound?”
The short answer is taking the time to learn how to tune drums. Drums do NOT make a sound by themselves. Someone has to turn tension rods & hit the drums to get them to make any sound.
Instead of putting aside time to learn, people think an expensive drum will fix their “bad-sounding drum” problems.
It will NOT.
For this to work, you must be willing to put in the time by taking your drum heads off, re-tuning, and repeating.
Ten thousand hours is only around 417 days. If you took an hour per 24-hour cycle to learn how to tune your drums, it would only take roughly 40 years to get those hours in. Assuming you only do an hour a day 😉.
I say all of that to say there is no “self-help book for drum tuning.” Even if there was, you can only get so far with it. You need to be willing to work to achieve the sound you desire for yourself and the music!
Never stop asking questions, experimenting, setting aside time, or digging for more. Your older self will appreciate that you put in the work now and not when it’s potentially too late.
Anyways, have a fantastic week. Love you, guys!! Okay. Byeeeee. 🥁🤓👊🏻❤️🙏🏻
—
DW Design Series 14” x 5.5” specs:
* Size: 14” x 5.5”
* Shell: 10 ply HVLT North American Maple shell (Vertical Low Timbre shell with a horizontal outer ply)
* Hoops: chrome plated 2.3 triple flanged hoops top and bottom
* Shell Finish: Finishply wrap
* Hardware Finish: Chrome hardware
* Configuration: 10 mini Turret lug configuration w/ true pitch tension rods
* Bearing edges: single 45° inner, with a rounded over outer.
* DW 20 strand wires
* MAG throw off, DW butt plate
* Drum heads: Remo Controlled Sound coated (batter), Ambassador Snare side (resonant)
—
#testabeatdrums #geargeek #drumheads #drumset #drums #drum #baterista #drumsultant #drummer #homestudio #tones #beastmode #microphones #drumheads #snaredrum #orlandodrumtech #orlandodrummer #trustyourears #florida #underdog #findyoursound #understandingdrums #keeponlearning #officialsnaregeek #dwdrums #drumtuning #tenthousandhours #time #design #maple
Видео What is your drum tuning process? #shorts #short #snaredrum #snare #tuning #drumtuning #process канала Nate Testa
Комментарии отсутствуют
Информация о видео
18 мая 2023 г. 1:45:01
00:00:07
Другие видео канала




















