Shapeoko Pro Assembly Overview

NOTE: Additional comments/correction/built notes in description.

The Shapeoko Pro's assembly process has been vastly streamlined over that of the Shapeoko 3. Each step is compartmentalized in a box, letting you focus on one component or system at a time. This video will cover the required assembly processed for putting together your CNC router.

Comments/Correction/Built Notes:
- In some cases the Y1 port on the control board should be connected to the Right Y stepper, not Left. Keep an eye on this when you home the machine for the first time. The gantry should travel to the back right corner. Reverse your Y connectors if this is not the case.
- The plastic "Filler Strips" that go under the hybrid table to stop things from falling under the T-track are not needed on newer machines. We have a new extrusion with an extra wide lip that reduces the gap.
- In case it was not clear, remove the Shipping Bolt from the X-axis carrier plate before installing the Z-axis. Otherwise the Z-axis won't mount correctly...
-If you are missing fasteners, please contact support. All hardware is Metric, so if you're missing something and you want to source it locally just bring the screw/bolt to the hardware store and look for something the same diameter/length.
0:00 Introduction
1:20 Step 1 - Frame
2:22 Step 2 - Y-Rails
3:15 Step 3 - Endplates
3:49 Step 4 - Gantry
6:06 Step 5 - Z-Axis
7:12 Step 6 - Stepper/Switch Drag Chains
9:07 Step 7 - Router & Drag Chains
11:43 Step 8 - Hybrid Table
13:15 Step 9 - Electronics
14:27 Step 10 - Software Configuration

Видео Shapeoko Pro Assembly Overview канала Carbide 3D