Bits and End Mills for Beginners - CNC For the Absolute Beginner
Bits and End Mills for Beginners - CNC For the Absolute Beginner
More down here ↓↓↓ Click SHOW MORE!
This is another in a series of videos geared toward the person who is just getting started in the home CNC hobby.
In this video, we’ll get into another controversial topic – router bits and end mills.
One of the more common questions asked by folks just getting into the CNC hobby is about which bits to buy when you’re just starting out. In this video I’ll give you some suggestions for bits and end mills to have on hand that will allow you to successfully complete the most common tasks the beginner is likely to encounter.
This is by no means meant to be a comprehensive list that covers every possible contingency. It’s meant to be a guideline to allow you to do more research on your own, and maybe make a more informed decision when you choose bits that are right for you.
I’ve put links to all of the bits and end mills I talk about in this video below. Some of these links are affiliate links, which will help support this channel, and some links are not. I am in no way endorsed, nor sponsored by any of the bit or collet manufacturers mentioned. I offer these links to allow you to see exactly what I’m talking about for yourself.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to the tools shown in this video:
Elaire Crop – Router Collets: http://www.elairecorp.com/routercollets.html
Bosch 1/4” Upcut Spiral Bit: https://amzn.to/2pOyJUx
Whiteside 1/4” Upcut Spiral Bit: https://amzn.to/2PLhzm0
Bosch 1/4” Downcut Spiral Bit: https://amzn.to/2RIXazB
Whiteside 1/4” Downcut Spiral Bit: https://amzn.to/2CXgpkL
CMT 60° v-bit: https://amzn.to/2J95aWt
Magnate 60° v-bit : http://amzn.to/2FBKpzS
CMT 90° v-bit: https://amzn.to/2CXguVB
Magnate 90° v-bit: http://amzn.to/2Exvesl
Yonico .25" Ballnose: .25" shank - http://amzn.to/2GFR4dK
Yonico .125" Ballnose: .25" shank - http://amzn.to/2GF0beT
EnPointe .125" Ballnose: .125" shank - http://amzn.to/2GHot80
Freud 1.25" Surfacing Bit: http://amzn.to/2GGyPF9
Magnate 1.25” Surfacing Bit: https://amzn.to/2J7Uzvd
Porter Cable 690 Router: https://amzn.to/2RHti6F
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using any of the following links:
StreamLab : https://streamlabs.com/marklindsaycnc
PayPal: https://paypal.me/MarkLindsayCNC
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
YouTube: https://www.youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: https://trampledunderfootpodcast.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support! You Folks ROCK!
This video is for informational and entertainment purposes only.
#Aspire #VCarve #Vectric #Tutorial
Видео Bits and End Mills for Beginners - CNC For the Absolute Beginner канала Mark Lindsay CNC
More down here ↓↓↓ Click SHOW MORE!
This is another in a series of videos geared toward the person who is just getting started in the home CNC hobby.
In this video, we’ll get into another controversial topic – router bits and end mills.
One of the more common questions asked by folks just getting into the CNC hobby is about which bits to buy when you’re just starting out. In this video I’ll give you some suggestions for bits and end mills to have on hand that will allow you to successfully complete the most common tasks the beginner is likely to encounter.
This is by no means meant to be a comprehensive list that covers every possible contingency. It’s meant to be a guideline to allow you to do more research on your own, and maybe make a more informed decision when you choose bits that are right for you.
I’ve put links to all of the bits and end mills I talk about in this video below. Some of these links are affiliate links, which will help support this channel, and some links are not. I am in no way endorsed, nor sponsored by any of the bit or collet manufacturers mentioned. I offer these links to allow you to see exactly what I’m talking about for yourself.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to the tools shown in this video:
Elaire Crop – Router Collets: http://www.elairecorp.com/routercollets.html
Bosch 1/4” Upcut Spiral Bit: https://amzn.to/2pOyJUx
Whiteside 1/4” Upcut Spiral Bit: https://amzn.to/2PLhzm0
Bosch 1/4” Downcut Spiral Bit: https://amzn.to/2RIXazB
Whiteside 1/4” Downcut Spiral Bit: https://amzn.to/2CXgpkL
CMT 60° v-bit: https://amzn.to/2J95aWt
Magnate 60° v-bit : http://amzn.to/2FBKpzS
CMT 90° v-bit: https://amzn.to/2CXguVB
Magnate 90° v-bit: http://amzn.to/2Exvesl
Yonico .25" Ballnose: .25" shank - http://amzn.to/2GFR4dK
Yonico .125" Ballnose: .25" shank - http://amzn.to/2GF0beT
EnPointe .125" Ballnose: .125" shank - http://amzn.to/2GHot80
Freud 1.25" Surfacing Bit: http://amzn.to/2GGyPF9
Magnate 1.25” Surfacing Bit: https://amzn.to/2J7Uzvd
Porter Cable 690 Router: https://amzn.to/2RHti6F
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using any of the following links:
StreamLab : https://streamlabs.com/marklindsaycnc
PayPal: https://paypal.me/MarkLindsayCNC
______________________________________________________________________________
Link to the Vectric for the Absolute Beginner Playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: https://www.youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
https://harnealmedia.com/
______________________________________________________________________________
Link to The Trampled Underfoot Podcast, hosted by my friend Eloy Escagedo and I. "Two guys from different decades, backgrounds, and opposite sides of the continent discuss life, the universe, and everything. What's the show about? About an hour..."
YouTube: https://www.youtube.com/channel/UCPYOVYk9g-o0tliUqO18gnQ
Facebook Page: https://www.facebook.com/pg/TrampledUnderfootPodcast
Past Episodes available at our website: https://trampledunderfootpodcast.com/
______________________________________________________________________________
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com/
______________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support! You Folks ROCK!
This video is for informational and entertainment purposes only.
#Aspire #VCarve #Vectric #Tutorial
Видео Bits and End Mills for Beginners - CNC For the Absolute Beginner канала Mark Lindsay CNC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![The Most Complete CNC Router Bits Tutorial and Review [AND The Best CNC Router Starter Set]](https://i.ytimg.com/vi/wdQ-_hllmKY/default.jpg)
![V-Carving for the Absolute Beginner – Part 1 – How It Works](https://i.ytimg.com/vi/JGG0yTPih4w/default.jpg)
![Five Things CNC Beginners Should Stop Doing - CNC for Beginners](https://i.ytimg.com/vi/CoH32D7F8iY/default.jpg)
![Spiral Bits - Compression VS Upcut VS Downcut VS Straight - Never Before Seen 19,000 FPS HD Video](https://i.ytimg.com/vi/seAmL6mtqgM/default.jpg)
![](https://i.ytimg.com/vi/6P8-L9ufdlI/default.jpg)
![CNC Basics - What You Need To Get Started](https://i.ytimg.com/vi/lQ-MYnyxh7M/default.jpg)
![Beginners Guide to CNC Bits - Including Speeds and Feeds](https://i.ytimg.com/vi/obwwoEAbBjc/default.jpg)
![Endmill Basics](https://i.ytimg.com/vi/Y9Qi29WqOCs/default.jpg)
![CNC Bits Every Beginner Needs | Top 5 Bits for CNC Beginners](https://i.ytimg.com/vi/D4I94_D-dHo/default.jpg)
![5 Great CNC Projects | CNC Plans Available](https://i.ytimg.com/vi/cyJu7Nv55pE/default.jpg)
![Comparison of 4 different CNC endmill router bits](https://i.ytimg.com/vi/2FjXsZKrobQ/default.jpg)
![CNC Router Bits Explained: The Best Bit To Use](https://i.ytimg.com/vi/D_3-ghB-f4w/default.jpg)
![Best CNC Router Bits & Tools For Beginners, Good CNC route bit set](https://i.ytimg.com/vi/c2JnKoplEck/default.jpg)
![A Secure CNC Mounting Technique - NO DOUBLE SIDED TAPE!](https://i.ytimg.com/vi/3uTsQ3dYRrk/default.jpg)
![Router Bit Speeds, Feed and Types](https://i.ytimg.com/vi/59Qmgo_aYXY/default.jpg)
![CNC V Bits Explained](https://i.ytimg.com/vi/9DD6T84jbXc/default.jpg)
![Paint and Finish a V Carved Project - CNC For Beginners](https://i.ytimg.com/vi/bZPEaOhzx0s/default.jpg)
![Climb Cut VS Conventional Cut - Part 8 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/MPsGQjjZpKE/default.jpg)
![Basic Bitmap Trace and Node Editing - Part 14 - Vectric For Absolute Beginners](https://i.ytimg.com/vi/p7tQROrtE-A/default.jpg)
![Creating the Spoilboard Surfacing Toolpath](https://i.ytimg.com/vi/OMy0SMNRFOA/default.jpg)