Creating the Spoilboard Surfacing Toolpath
Creating the Spoilboard Surfacing Toolpath
More down here ↓↓↓ Click SHOW MORE!
The website article that accompanies this video can be found here:
http://marklindsaycnc.com/index.php/2017/11/19/creating-spoilboard-surfacing-toolpath-vcarve-pro/
In this video, I’ll show you the steps I went through to create a spoilboard surfacing toolpath in Vcarve Pro.
It looks and sounds intimidating to some, but it’s actually quite easy, as long as you remember a couple of things.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to products and supplies used or discussed in this video:
Freud 1-1/4" Diameter Mortising Bit (16-106): https://amzn.to/2QySKNh
Here’s the link to my Gatton CNC Build Playlist!
https://www.youtube.com/playlist?list=PLLuYLaC3-QRO2dNnYsXfPjgpSMHU5mCey
For more info on a Gatton CNC kit of your own, check out Dave Gatton’s Home Page at:
http://www.davegatton.com/
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: http://makersmedianetwork.com/
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
Disclaimer: Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
Видео Creating the Spoilboard Surfacing Toolpath канала Mark Lindsay CNC
More down here ↓↓↓ Click SHOW MORE!
The website article that accompanies this video can be found here:
http://marklindsaycnc.com/index.php/2017/11/19/creating-spoilboard-surfacing-toolpath-vcarve-pro/
In this video, I’ll show you the steps I went through to create a spoilboard surfacing toolpath in Vcarve Pro.
It looks and sounds intimidating to some, but it’s actually quite easy, as long as you remember a couple of things.
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to products and supplies used or discussed in this video:
Freud 1-1/4" Diameter Mortising Bit (16-106): https://amzn.to/2QySKNh
Here’s the link to my Gatton CNC Build Playlist!
https://www.youtube.com/playlist?list=PLLuYLaC3-QRO2dNnYsXfPjgpSMHU5mCey
For more info on a Gatton CNC kit of your own, check out Dave Gatton’s Home Page at:
http://www.davegatton.com/
I’m a proud founding member of the Maker’s Media Network.
Come check us out at: http://makersmedianetwork.com/
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products/
Disclaimer: Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
Видео Creating the Spoilboard Surfacing Toolpath канала Mark Lindsay CNC
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Tramming the Router on my Gatton CNCText Tips & Tricks - Part 13 - Vectric For Absolute BeginnersThe Tool Database - Part 9 - Vectric For Absolute BeginnersMaking new and better CNC clamps (free templates)Cnc spoil board resurfacing (Start to finish)Designing and creating a CNC wasteboardNew Spoilboard - Best Improvement yet?Flatten Wood Slabs with a CNC // Laguna IQ CNC // Aspire DemoVectric V10 Tutorials | 2.5D Toolpaths | VCarve Toolpath GuideHow to Use Dingbats in V Carve ProClimb Cut VS Conventional Cut - Part 8 - Vectric For Absolute BeginnersSpoil Board Surfacing - How and Why? With a STEPCRAFT CNCAdding a Spoilboard to my Gatton CNCHow To Setup A 3D Carving Project in Vectric VCarve Pro/DesktopHow to make a spoil board - CNC projectPreparing a Vacuum Table spoil board for flow through fixturing on a ShopSabre CNC Router!Importing DXF Files - Part 5 - Vectric For Absolute BeginnersCNC: Waste Board Grid, Open Vectors, and Wasted Time via Rapid SpeedIntro to Ramps and Leads - Part 44 - Vectric For Absolute BeginnersLevelling CNC Waste Board - G Code Travel Error