Complete Shapeoko Project Walkthrough - Building a Bluetooth Speaker

Here's a comprehensive look at a typical workflow for the Shapeoko 3 Desktop CNC. We'll cover the design of a part in Carbide Create and how to machine it in this step-by-step tutorial.

Parts and tools list, more links will be added soon.
- #201 Endmill (https://shop.carbide3d.com/collections/cutters/products/201-25-end-mill-cutter-qty-2?variant=1256409455)
- 90 Degree V-bit (https://shop.carbide3d.com/collections/cutters/products/301-50-v-bit-cutter?variant=19195357958)
- Soldering iron, flux & solder
-120 & 220 grit sand paper
- Shellac (BIN Primer recommended)
- Spray Paint or Plastidip
- Wood Glue
-1” MDF or plywood (1ft x 2ft)
- 1”x5”x12” finished wood (suggest maple for the nice grains)
- 3x 18650 Lithium Batteries (either from Parts Express or recycle them from a laptop battery)
- 1/4-20 Threaded inserts (https://www.mcmaster.com/92105a100, they only sell them in packs of 100 on McMaster-Carr)
- 4” 1/4x20 bolts (https://www.mcmaster.com/90044a131, sold in packs of 10)
- Dayton Audio KAB-215 2x15W Class D Audio Amplifier Board with Bluetooth 2.1
- Dayton Audio KAB-LED Red/Green/Blue LED Package for Bluetooth Amplifier Boards
- Dayton Audio KAB-BE 18650 Battery Extension Board for Bluetooth Amplifier Boards
- Dayton Audio KAB-AB L-type Aluminum Bracket for Bluetooth Amplifier Boards
- Dayton Audio KAB-FC Function Cables Package for Bluetooth Amplifier Boards
- Visaton FRS7-4 2.5" Full-Range Speaker 4 Ohm
- Samsung U083L03SSK1 3" Poly Cone Passive Radiator

0:00 Intro
1:15 Designing the Speaker Back
8:23 Adding Toolpaths
18:13 Designing the Bezel
21:30 Adding Toolpaths
28:40 Cutting the Speaker Bezel
45:28 Gluing the Body Together
50:32 Assembling the Speaker
1:05:12 Speaker Finished

Learn more about our line of desktop CNC's and software at carbide3d.com.

Видео Complete Shapeoko Project Walkthrough - Building a Bluetooth Speaker канала Carbide 3D