How to Remove the REAR HUB MOTOR on a Ziggy G5 (Yadea G5) Electric Scooter "Electric Moped"

00:00 - Introduction
00:47 - Disconnect the battery
1:00 - Remove the seat bucket
1:15 - Disconnecting the hub motor
2:17 - Removing the rear wheel
3:06 - Removing the brake caliper
The Ziggy G5 is an electric scooter from the electric scooter manufacturer Yadea. It is sold by Ziggy as an "electric moped" and features a 2300W Electric Motor built into the rear wheel which makes removing it more complicated than a standard gasoline powered scooter.

The electric motor has long thick wires that transfer the current from the motor controller to the motor. These wires will need to be disconnected for the wheel to be removed from the scooter for any reason. You may need to remove the back wheel to replace the internal hub motor. Or you may just need to replace the rear tire like in this case.

The the tools you will need are: 10mm socket, number 1 phillips screwdriver, 8mm socket, 21mm socket and a ratchet or socket driver.

#Ziggy #Ebike #electricscooter

Видео How to Remove the REAR HUB MOTOR on a Ziggy G5 (Yadea G5) Electric Scooter "Electric Moped" канала Scooter 911