What is the DisChargePlus? Learn How to Measure the Health of Your 36/48 Volt Batteries 🔋

With three programmable discharge rates, 200-amp clamps with 8-foot cables, and no AC power necessary, FSIP's DisChargePlus is the economical choice for testing 36- and 48-volt battery packs. Store up to 14 discharge cycles and find out, down to the minute, how long each of your batteries can last on a full charge.

Shop Now:
https://shop.fsip.biz/en/product/battery-management-dischargers/dischargeplus-3648v-255675a-battery-discharger--94-DCP3648

Other Battery Management Products:
https://shop.fsip.biz/en/catalog/node/battery-management

#DisChargePlus #BatteryManagement #FSIP #ForkliftIndustry #MaterialHandling

Video Transcript:
The DisChargePlus from Flight Systems Industrial Products, an economical choice for testing 36 and 48 volt battery packs. As batteries age, capacity testing is an important indicator of battery health. Because battery energy is measured in minutes, the DisChargePlus provides an easy way to accurately measure the length of time that batteries can run on a single charge. When using the DisChargePlus, make sure you are in a safe operating space for optimal results. Battery packs should be fully charged with batteries being no less than 1 volt different.

To begin, grab the 200 amp clamps, which feature an 8-foot cable, and securely connect the red clamp to the positive terminal, and the black clamp to the negative terminal. Once attached, the solenoid will close, and the machine will display the system voltage and discharge rate, with no AC power required! The DisChargePlus can be operated with three programmable discharge rates based on the voltage of your battery pack. To program the discharge rate, press the menu button four times. Select the rate, and it will be held in the memory of the unit.

Discharge time and shutoff voltage are also programmable by pressing the menu button. Press the "Start/Stop/Pause" button to begin, stop, or pause a discharge cycle. Once it is started, the display will show the current cycle runtime and battery voltage. Never disconnect the clamps while the red LED light is on, and the unit is operating! The DisChargePlus will automatically stop a discharge cycle when a minimum voltage is reached or when a maximum time has elapsed. Press the menu button to display the minimum voltage, actual voltage, and cycle time. The DisChargePlus even stores the previous 14 discharge cycles for your reference.

If you are looking for an economical and efficient way to test 36 and 48 volt battery packs, call FSIP at 1-800-333-1194, or shop online at shop.fsip.biz.

Видео What is the DisChargePlus? Learn How to Measure the Health of Your 36/48 Volt Batteries 🔋 канала FSIP Electronics