Meet the Xtender Battery Regenerator, FSIP's Solution to Revive Your Batteries ⚡🔋⚡

Batteries lose capacity and efficiency due to accumulation of extremely hard lead sulfate crystals. The standard charging method will not reverse this process. The Xtender will restore and prolong the life of these batteries and will save you money.

All-In-One Discharger, Desulfator, and Regenerator:
• Solutions for full range of battery specifications
• Simple touch screen programming
• Bluetooth wireless communication with PC
• Detailed reports
• Software included

Don't Replace. Regenerate! To schedule your demo, call 1-800-333-1194 ext. 265, or email xtender@fsip.biz.

Learn More About the Xtender:
https://shop.fsip.biz/en/content/models

#Xtender #BatteryChargers #BatteryManagement #GolfIndustry #GolfCar #GolfCart #FSIP #ForkliftIndustry #MaterialHandling

Video Transcript:
Looking to revive your old and used batteries? We can help you with our battery regenerator. An Xtender can regenerate all lead-acid batteries. These batteries are commonly used on forklifts, telecommunications and back-up power, trains, golf carts and many other applications. Batteries are bound to run down, and they have to be recharged. When this happens, your battery will lose a lot of its capacity and efficiency due to sulfation, which is the accumulation of extremely hard lead sulfate crystals. Sulfate crystals cannot be loosened with a normal charger, and this will eventually cause the lead plates to become partially unusable, which results in capacity loss. You will have to charge the battery more frequently, and its life span will decrease. There are two possible solutions for malfunctioning batteries. You can either replace the old battery, but this is very expensive and not environmentally friendly, or you can desulfate it and give it a second life with our Xtender technology.

The Xtender is a combination of multiple machines and is fully automatic. This means no more switching machine, and gives the user many advantages, and requires less attention during the process. An automatic regeneration process consists of five to six phases. It starts with a controlled discharge, then two restoration cycles, followed by another discharge, and final restoration. During the process, a high-frequency pulse is applied. This will desulfate your batteries very effectively without putting too much strain on them. When comparing the two discharge cycles afterwards, you will see how much capacity the battery has gained.

Free diagnostic software is provided along with the equipment. It allows you to download detailed regeneration reports. This process is fast, accurate, and very user-friendly. Here are some other interesting features of our battery regenerator. It can be used for different voltages and capacities. It is compatible with our Xcell BMS system for wireless detection of bad cells. Data transfers can be done wirelessly or wired, and it can be used as a discharger or regenerator only. The Xtender is proven technology. Visit shop.fsip.biz for more information.

Видео Meet the Xtender Battery Regenerator, FSIP's Solution to Revive Your Batteries ⚡🔋⚡ канала FSIP Electronics