Matrix kb Lang
Testing LinuxCNC's Matrix_kb with a 5x5 matrix of multiplex buttons. Given that these are momentary switches, all should be off if nothing is pressed.
Видео Matrix kb Lang канала RotarySMP
Видео Matrix kb Lang канала RotarySMP
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
The Boley 4LV top slide being cleaned up on a Klopp ShaperIgnore S0 BranchMAHO MH400E testing "NC ready" CircuitMAHO MH400E - Linuxcnc retrofit - gearboxcontrolMilling a spacer on the MAHO CNC MillMAHO MH 400E spindle runoutMAHO 400E LinuxCNC retrofit, first glass scale read out.A message from the MAHOBanggood incorrect delivery claim.Testing the drag engraverMAHO MH400E lost Motion on Y Axis LinuxCNCCNC'ing the infamous 7x12 mini lathe - Episode 23 - Installing LinuxRotarySMP Livestream - 17. Dec.23 @ 20:30 CETPolaroid modified to use Instax film- episode 2 - making the film drive.Boley 4LV Spindle run out. TIR near 0.00mm / 0.0001" on the alignment bossFace milling LinuxCNC MahoTool height setting Gmoccapy, need troubleshooting helpHorizontal milling on Maho MH400EFirst oil firing of new casting furnaceMAHO MH600E Gearbox gear shiftingAxis drift 2, MAHO M400E Y and Z axis AD converters EXE reversed