Testing the drag engraver
I tried engraving on teh MAHO MH400E, but don't like the 4000rpm spindle screaming for an hour, as it cuts at 12mm/min. Something faster and better fro the machine was required.
Thanks to everyone who has posted their DIY drag engraver designs. This ones design was driven by 6mm carbide end mill shafts and the spring I found.
As a first test, I was inspired by AvE'S recent singe point forming video:
https://www.youtube.com/watch?v=aj6hXN0Ewbc
Видео Testing the drag engraver канала RotarySMP
Thanks to everyone who has posted their DIY drag engraver designs. This ones design was driven by 6mm carbide end mill shafts and the spring I found.
As a first test, I was inspired by AvE'S recent singe point forming video:
https://www.youtube.com/watch?v=aj6hXN0Ewbc
Видео Testing the drag engraver канала RotarySMP
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MAHO MH600E Gearbox gear change through all gearsMAHO MH400E linuxcnc conversion G83 peck cycleThe Boley 4LV top slide being cleaned up on a Klopp ShaperIgnore S0 BranchMAHO MH400E testing "NC ready" CircuitMAHO MH400E - Linuxcnc retrofit - gearboxcontrolMilling a spacer on the MAHO CNC MillMAHO MH 400E spindle runoutThread Milling with linuxCNC on the MAHO MH400EEnlarging clamping slots using the MAHO horizontal spindleUsing a concrete "Rüttler" to vibrate refractoryMAHO 400E LinuxCNC retrofit, first glass scale read out.A message from the MAHOBanggood incorrect delivery claim.MAHO MH400E lost Motion on Y Axis LinuxCNCCNC'ing the infamous 7x12 mini lathe - Episode 23 - Installing LinuxPolaroid modified to use Instax film- episode 2 - making the film drive.Boley 4LV Spindle run out. TIR near 0.00mm / 0.0001" on the alignment bossFace milling LinuxCNC MahoMatrix kb Lang