Polaroid modified to use Instax film- episode 2 - making the film drive.
This episode, we make the film drive crank system, and test it.
The bearing block is 3D printed, the drive shaft turn on the Boley 4LV lathe, and then milled on a MAHO MH400E CNC mill.
Видео Polaroid modified to use Instax film- episode 2 - making the film drive. канала RotarySMP
The bearing block is 3D printed, the drive shaft turn on the Boley 4LV lathe, and then milled on a MAHO MH400E CNC mill.
Видео Polaroid modified to use Instax film- episode 2 - making the film drive. канала RotarySMP
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![MAHO MH600E Gearbox gear change through all gears](https://i.ytimg.com/vi/FnpPUbspe24/default.jpg)
![The Boley 4LV top slide being cleaned up on a Klopp Shaper](https://i.ytimg.com/vi/D80O-UI3kpw/default.jpg)
![Ignore S0 Branch](https://i.ytimg.com/vi/eUm8Sw4e7vw/default.jpg)
![MAHO MH400E testing "NC ready" Circuit](https://i.ytimg.com/vi/pCcekLZFalQ/default.jpg)
![MAHO MH400E - Linuxcnc retrofit - gearboxcontrol](https://i.ytimg.com/vi/2gnshhzU7eI/default.jpg)
![Milling a spacer on the MAHO CNC Mill](https://i.ytimg.com/vi/-_-mVJ3xT8U/default.jpg)
![MAHO MH 400E spindle runout](https://i.ytimg.com/vi/8OOTBLRoC6c/default.jpg)
![MAHO 400E LinuxCNC retrofit, first glass scale read out.](https://i.ytimg.com/vi/rnFhr1iwywE/default.jpg)
![A message from the MAHO](https://i.ytimg.com/vi/EmtAUe0Jfhc/default.jpg)
![Banggood incorrect delivery claim.](https://i.ytimg.com/vi/lGmoFcVrN8M/default.jpg)
![Testing the drag engraver](https://i.ytimg.com/vi/f7DPc_cUeGY/default.jpg)
![MAHO MH400E lost Motion on Y Axis LinuxCNC](https://i.ytimg.com/vi/ShROaAJFe5k/default.jpg)
![CNC'ing the infamous 7x12 mini lathe - Episode 23 - Installing Linux](https://i.ytimg.com/vi/7xNS2MWN8Js/default.jpg)
![Boley 4LV Spindle run out. TIR near 0.00mm / 0.0001" on the alignment boss](https://i.ytimg.com/vi/Gp8YNbTDCrU/default.jpg)
![Face milling LinuxCNC Maho](https://i.ytimg.com/vi/hf8AwU-l0JI/default.jpg)
![Matrix kb Lang](https://i.ytimg.com/vi/gBMRJUDPraU/default.jpg)
![Threadmilling boring head](https://i.ytimg.com/vi/DovfyaXq5u8/default.jpg)
![Tool height setting Gmoccapy, need troubleshooting help](https://i.ytimg.com/vi/bd8H5f4MZaE/default.jpg)
![Horizontal milling on Maho MH400E](https://i.ytimg.com/vi/yDmBxdYyoyg/default.jpg)
![First oil firing of new casting furnace](https://i.ytimg.com/vi/AGd_Otwjsqc/default.jpg)