How I Prepared this Water Network Layout in AutoCAD (After designing in WaterGEMS)

The purpose of today's tutorial is to show you how to prepare a project layout for a given water network after designing it in WaterGEMS Software! Not just how to prepare this layout but also we will cover how to use the annotation feature in WaterGEMS! I hope the gained knowledge will be useful in your work as an engineer!

Regards

Eng. Lodrick Thomas
Founder at @HydroinformaticsAcademy

==============
RECOMMENDED TUTORIALS
==============
1. Learn how to design a water network with watergems: https://youtu.be/ze7csigjx8g
2. Prepare Project Layout with QGIS: https://www.youtube.com/playlist?list=PLSxG_R_25yhcYLoexezWrtebPcG9AVsCE

==============
TIMESTAMPS
==============
00:00 Introduction
00:50 Network Preparation
01:30 Which Properties to Display on Layout Drawing?
01:58 Pipes Annotation in WaterGEMS
04:59 Junctions Annotation in WaterGEMS
07:21 How to export DXF AutoCAD File in WaterGEMS
09:04 Final Thoughts

==============
FOLLOW HYDROINFORMATICS ACADEMY ON SOCIAL MEDIA
==============
Telegram Channel: https://t.me/hydroinformaticsacademy
Linkedin Page: https://www.linkedin.com/company/hydroinformaticsacademy
Facebook Page: https://web.facebook.com/hydroinformaticsacademy
Want to support my channel? Here's Patreon Link: https://www.patreon.com/hydroinformaticsacademy

Not SUBSCRIBEED YET? Here is the Link: https://www.youtube.com/c/HydroinformaticsAcademy?sub_confirmation=1

========
DISCLAIMER
========
This is not engineering advice. Everything here is for informational and educational purposes only!
#watergems #hydroinformaticsacademy

Видео How I Prepared this Water Network Layout in AutoCAD (After designing in WaterGEMS) канала Hydroinformatics Academy