Using an Eora 3D Scanner and the Alpha Android App to Scan a PS4 Controller
There aren't many videos from "normies" about the Eora 3D scanner so I decided to record one. Keep in mind that the app, at the moment, is in the alpha level of development so problems and lack of functionality are to be expected.
Unlisted video showing the calibration...
https://www.youtube.com/watch?v=6gvASmKaaOw
Видео Using an Eora 3D Scanner and the Alpha Android App to Scan a PS4 Controller канала Hirudin
Unlisted video showing the calibration...
https://www.youtube.com/watch?v=6gvASmKaaOw
Видео Using an Eora 3D Scanner and the Alpha Android App to Scan a PS4 Controller канала Hirudin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Testing (the lack of) Germicidal UVC Output From 60W LED BulbSerial Number CNC Engraving Macro - Easily add serializing ability to your NC programsFusion 360 CAM Post Processing Bug - Imperial Instead Of MetricCRACE 2 Demonstration (lunacnc.com is live!)CRACE 2 Status: I milled SEVERAL!Fusion 360 CAM 2D Contour Roughing/Finishing Feed-Rate BugsUsing "If Then Else" logic in Fusion 360 CAM expressionsFirst video recorded with CRACE 2 prototype (4K60 - unedited - headphone warning)CRACE 2 Redesign StatusCNC Machining a CRACE wit' a Speedio S700X1 💦📷💦Testing CRACE Airflow Orientation and Mic Attenuation (Coolant-Resistant Action Camera Enclosure)Measuring Action Camera Enclosure Air ConsumptionTesting My Latest Camera Enclosure and Post Processor v2.06bPretty Ultimate Coolant-Resistant Action Camera Enclosure (for GoPro and Yi cameras)Fusion 360 - Show Machining Time in the Operation ListAutomatically Optimize Chamfer Tip Offset Using ExpressionsA quick test of my latest action camera enclosure (headphone user warning)CNC Machining a Round Part with a Mill Instead of a Lathe (7075 aluminum) (4K 60)Niagara Cutter N18597 - Good Tool (for aluminum)Expunge the Plunge - save valuable seconds in Fusion 360 CAM by plunging faster