CRACE 2 Status: I milled SEVERAL!
And now they're off to the anodizer...
Here's my Instagram page: https://www.instagram.com/hirudins_luna_cnc/
Thanks for the reminder, bluehandsvideo!
Видео CRACE 2 Status: I milled SEVERAL! канала Hirudin
Here's my Instagram page: https://www.instagram.com/hirudins_luna_cnc/
Thanks for the reminder, bluehandsvideo!
Видео CRACE 2 Status: I milled SEVERAL! канала Hirudin
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Testing (the lack of) Germicidal UVC Output From 60W LED Bulb
Serial Number CNC Engraving Macro - Easily add serializing ability to your NC programs
Fusion 360 CAM Post Processing Bug - Imperial Instead Of Metric
CRACE 2 Demonstration (lunacnc.com is live!)
Fusion 360 CAM 2D Contour Roughing/Finishing Feed-Rate Bugs
Using "If Then Else" logic in Fusion 360 CAM expressions
First video recorded with CRACE 2 prototype (4K60 - unedited - headphone warning)
CRACE 2 Redesign Status
CNC Machining a CRACE wit' a Speedio S700X1 💦📷💦
Testing CRACE Airflow Orientation and Mic Attenuation (Coolant-Resistant Action Camera Enclosure)
Measuring Action Camera Enclosure Air Consumption
Testing My Latest Camera Enclosure and Post Processor v2.06b
Pretty Ultimate Coolant-Resistant Action Camera Enclosure (for GoPro and Yi cameras)
Fusion 360 - Show Machining Time in the Operation List
Using an Eora 3D Scanner and the Alpha Android App to Scan a PS4 Controller
Automatically Optimize Chamfer Tip Offset Using Expressions
A quick test of my latest action camera enclosure (headphone user warning)
CNC Machining a Round Part with a Mill Instead of a Lathe (7075 aluminum) (4K 60)
Niagara Cutter N18597 - Good Tool (for aluminum)
Expunge the Plunge - save valuable seconds in Fusion 360 CAM by plunging faster