Hand Vise Restoration
Hand vise are very useful for holding small objects that need to be worked by hand. By now I have quite a good selection of these in various sizes and I use some of them very often, especially when I need to file something small like one of my cast keychain.
All the hand vise I have where bought at flea markets, being common to find these are also very affordable (got this one for 3€).
Made this restoration video to show you the proces I go through to clean and fix these going for the extra mile and making this one "pretty".
You may think it's a waste of time, probably true, but it's nice to take some extra care with tools sometime just for the fun of it.
Index of operation and materials:
Electrolysis to remove rust: water and sodium carbonate solution, vise connected to negative and steel sacrificial anodes to positive of a 12V DC power supply (car battery charger). 3 hrs at 10amp.
1:46 Cleaning up the residue of the electrolysis process with steel wire brush.
2:20 Drying immediately all parts with rag and heatgun
2:50 Sintetic oil applied to all surfaces to prevent rust
4:05 Grinding back to clean metal the jaws on the 2x72 belt grinder
5:02 Hand sanding from 120 to 600 grit in preparation of polishing
5:35 Buffing on cotton wheel with fine polishing paste
6:16 Flattening jaws with files
6:54 Filing new pattern for the jaws with triangular file
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
https://www.patreon.com/blackbeardprojects
★Website★
http://blackbeardproject.com/
★Follow me★
Facebook ► https://www.facebook.com/BlackBeardProjects/
Twitter ► https://twitter.com/BlackBeardProje
Instagram ► https://www.instagram.com/black_beard_projects/
★Music★
Liberation by BausicProductions ► https://www.youtube.com/channel/UCM_AXh_l2oiffOS7WHf3acg
Licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/)
Видео Hand Vise Restoration канала Black Beard Projects
All the hand vise I have where bought at flea markets, being common to find these are also very affordable (got this one for 3€).
Made this restoration video to show you the proces I go through to clean and fix these going for the extra mile and making this one "pretty".
You may think it's a waste of time, probably true, but it's nice to take some extra care with tools sometime just for the fun of it.
Index of operation and materials:
Electrolysis to remove rust: water and sodium carbonate solution, vise connected to negative and steel sacrificial anodes to positive of a 12V DC power supply (car battery charger). 3 hrs at 10amp.
1:46 Cleaning up the residue of the electrolysis process with steel wire brush.
2:20 Drying immediately all parts with rag and heatgun
2:50 Sintetic oil applied to all surfaces to prevent rust
4:05 Grinding back to clean metal the jaws on the 2x72 belt grinder
5:02 Hand sanding from 120 to 600 grit in preparation of polishing
5:35 Buffing on cotton wheel with fine polishing paste
6:16 Flattening jaws with files
6:54 Filing new pattern for the jaws with triangular file
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
https://www.patreon.com/blackbeardprojects
★Website★
http://blackbeardproject.com/
★Follow me★
Facebook ► https://www.facebook.com/BlackBeardProjects/
Twitter ► https://twitter.com/BlackBeardProje
Instagram ► https://www.instagram.com/black_beard_projects/
★Music★
Liberation by BausicProductions ► https://www.youtube.com/channel/UCM_AXh_l2oiffOS7WHf3acg
Licensed under a Creative Commons Attribution licence (https://creativecommons.org/licenses/by/4.0/)
Видео Hand Vise Restoration канала Black Beard Projects
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Vise Restoration Italian Steel Dovetail StyleKnife Making: Vegetable Razor / NakiriAntique Hand Vise Restoration With Burl Handle!A-Frame Fly Press RestorationEXCELSIOR Drill Press Restoration | Heavy Duty Geared-Head DrillPerfect Vise Restoration (CNC involved)Old Wood Shaper Back In Use (Cleanup / Restoration)Damaged Vise Restoration, 80 year old Samsonia Perfect Vise, Perfect RestorationHeavy Duty Tap Wrench RestorationLeg Vise RestorationHand Vise RestorationHuge Rusty Leg Vise - Perfect RestorationMetal Shear Restoration (Rebar Shear)A Decent Vise For My Rosa Drill Press | Restoration1950s Italian Bench Grinder / Buffer RestorationKnife Making: Feather Damascus Hunter1940s Automatic Hand-Saw Set [Restoration]1930's Very Rusty Tree Pruner RestorationForged Woodturning Tool | Skew Chisel