Heavy Duty Tap Wrench Restoration
Restoring a 50cm (20inch) steel tap wrench. Nice and big for tap between M9 and M27.
Found it at a local flea market for 8€. No visible maker mark but still a really nice piece, defenetly forth the price for me.
Index of operation and materials:
1:00 Electrolysis: water and sodium carbonate solution, parts connected to negative steel sacrificial anodes to positive of a 12V DC power supply (car battery charger). 3-4 hrs at 5amp.
1:37 De greasing jaws with mineral spirit
2:25 Polishing with steel brush wire
3:10 Cleaning burrs with needle file
4:14 Greasing jaws with spray bearing grease
4:46 Cleaning parts after electrolysis with brass wire brush
6:04 Drying parts immediately after electrolysis and coating with synthetic oil to prevent flash rust
5:58 Buffing with steel wool
7:35 Assembly with grease on threads and sliding surfaces
9:00 Testing with M16 tap (only cleaning existing threads on another project)
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
https://www.patreon.com/blackbeardprojects
★Website★
http://blackbeardproject.com/
★Follow me★
Facebook ► https://www.facebook.com/BlackBeardProjects/
Twitter ► https://twitter.com/BlackBeardProje
Instagram ► https://www.instagram.com/black_beard_projects/
Видео Heavy Duty Tap Wrench Restoration канала Black Beard Projects
Found it at a local flea market for 8€. No visible maker mark but still a really nice piece, defenetly forth the price for me.
Index of operation and materials:
1:00 Electrolysis: water and sodium carbonate solution, parts connected to negative steel sacrificial anodes to positive of a 12V DC power supply (car battery charger). 3-4 hrs at 5amp.
1:37 De greasing jaws with mineral spirit
2:25 Polishing with steel brush wire
3:10 Cleaning burrs with needle file
4:14 Greasing jaws with spray bearing grease
4:46 Cleaning parts after electrolysis with brass wire brush
6:04 Drying parts immediately after electrolysis and coating with synthetic oil to prevent flash rust
5:58 Buffing with steel wool
7:35 Assembly with grease on threads and sliding surfaces
9:00 Testing with M16 tap (only cleaning existing threads on another project)
Thanks a lot for watching, I hope you liked the video!
Suggestions and comments are welcome.
Leave a like and share to anyone who might be interested!
★Patreon★
https://www.patreon.com/blackbeardprojects
★Website★
http://blackbeardproject.com/
★Follow me★
Facebook ► https://www.facebook.com/BlackBeardProjects/
Twitter ► https://twitter.com/BlackBeardProje
Instagram ► https://www.instagram.com/black_beard_projects/
Видео Heavy Duty Tap Wrench Restoration канала Black Beard Projects
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Homemade TAP WRENCHBearing Forged Into Fine Woodworking ToolSNS 223: Greenfield #7 Tap Wrench RestoreHand Vise RestorationNicholson File Restoration1940's Two Speed Enclosed Breast Drill RestorationLeg Vise RestorationANGEL Safety Axe - Hand Tool Rescue CollaborationVintage Rusty Wiss Scissors RestorationVise Restoration Italian Steel Dovetail StyleSmall Tool Cart Restoration3 HOMEMADE TOOLS IDEAS || HOMEMADE TOOLS || DIY TOOLSHow Far Can I Forge a Copper Ingot?Restoration of at handle tap wrenchPower Hammer Die CoversAnvil Restoration (And Rust Remover Recipe)Why won't my wooden plane work!?! Troubleshooting jack and smoothing planesDIY Tap Wrench - Tapping Tool (Bar Wrench)Monkey Wrench restoration (Part1)