Temperature controlled fan control using #arduino

Steps to make this project:

1. Put the Arduino Nano and OLED display on a breadboard
2. Connect the SDA and SCL pins of the OLED display to the A4 and A5 of the Arduino Nano.
3. Connect the Vcc and Gnd of the Oled to +5v and GND of the Arduino nano
4. Connect the DHT 11 OUTPUT pin to digital pin number 5 of the Arduino nano and VCC and GND to +5v and GND.
5. Connect the FAN to the digital pin 6 and the GND of the Arduino nano.
6. Upload the code.

#shortsvideo #shorts

Видео Temperature controlled fan control using #arduino канала THE ELECTRONIC GUY