An Electronic Dice #arduinoproject

As you shake the circuit, a random number between 1 to 6 gets generated. Follow the steps given below to make it.

1. Put the Arduino on a breadboard
2. Connect the SDA pin of the OLED display to the A4 pin and the SCL pin of the OLED to the A5 pin of Arduino Nano.
3. After that connect the Vcc and GND to +5v and GND respectively.
3. Connect the SDA pin of ADXL345 to the A4 pin of Arduino.
5. Here the Vcc and GND are connected to 3.3V and GND of Arduino nano respectively.
4. Finally, upload the code. (check the comments)

#shortsvideo #shorts #arduino #arduinoproject

Видео An Electronic Dice #arduinoproject канала THE ELECTRONIC GUY