Overhauling the 7x12 mini lathe - Episode 13 - Scraping/fitting the tapered saddle gibs
Continuing on with the the complete geometric restoration, overhaul, and modification of the little SIEG 7x12 Mini-lathe. In this episode, the tapered gibs which were milled in episode 12 get scraped and fitted to the saddle.
It includes scrapping, milling, turning, and talking.
Видео Overhauling the 7x12 mini lathe - Episode 13 - Scraping/fitting the tapered saddle gibs канала RotarySMP
It includes scrapping, milling, turning, and talking.
Видео Overhauling the 7x12 mini lathe - Episode 13 - Scraping/fitting the tapered saddle gibs канала RotarySMP
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
MAHO MH600E Gearbox gear change through all gears
MAHO MH400E linuxcnc conversion G83 peck cycle
The Boley 4LV top slide being cleaned up on a Klopp Shaper
Ignore S0 Branch
MAHO MH400E testing "NC ready" Circuit
MAHO MH400E - Linuxcnc retrofit - gearboxcontrol
Milling a spacer on the MAHO CNC Mill
MAHO MH 400E spindle runout
Thread Milling with linuxCNC on the MAHO MH400E
Enlarging clamping slots using the MAHO horizontal spindle
Using a concrete "Rüttler" to vibrate refractory
MAHO 400E LinuxCNC retrofit, first glass scale read out.
A message from the MAHO
Banggood incorrect delivery claim.
Testing the drag engraver
MAHO MH400E lost Motion on Y Axis LinuxCNC
CNC'ing the infamous 7x12 mini lathe - Episode 23 - Installing Linux
Polaroid modified to use Instax film- episode 2 - making the film drive.
Boley 4LV Spindle run out. TIR near 0.00mm / 0.0001" on the alignment boss
Face milling LinuxCNC Maho
Matrix kb Lang