Dracoid : Blender to printer. (anet a8 3d printer)
Project : homo-draco-oid.
Type:mini size flying humanoid.
Height:37.5cm
Weight:1.19kg
Thrust:2.5kg+
Thrust/weight:2.1
Components :1x esp32(now I'm using usc32 with Bluetooth to test it) , 1x mpu6050, 8x voltage regulator mini 360 ,12x towerpro mg92b 3.5kg/cm micro servo, 9x towerpro mg90s 1.8kg/cm micro servo, 1x gnb 11.1v 850mah 80c/160c lipo battery, 4x 20a drone esc, 4x a2208 1100kv brushless motor, 4x 8 inch foldable drone propeller, 1kg abs filament, m2*6,*8,*10,*18 screws a lot, 10x m3*8 screws, 8x m3*16 crews with nut, 2x rectangular led 2*5*7.
3d stl, blender file:
https://drive.google.com/file/d/1k-i5fMZrG_uVSXMSH1is7coU2jaz3ifT/view?usp=drivesdk
Command for usc32:
https://drive.google.com/file/d/1RqWpAFw8zAuXES1zOCFc2Hh7Iln-X8rt/view?usp=drivesdk
Видео Dracoid : Blender to printer. (anet a8 3d printer) канала tang woonthai
Type:mini size flying humanoid.
Height:37.5cm
Weight:1.19kg
Thrust:2.5kg+
Thrust/weight:2.1
Components :1x esp32(now I'm using usc32 with Bluetooth to test it) , 1x mpu6050, 8x voltage regulator mini 360 ,12x towerpro mg92b 3.5kg/cm micro servo, 9x towerpro mg90s 1.8kg/cm micro servo, 1x gnb 11.1v 850mah 80c/160c lipo battery, 4x 20a drone esc, 4x a2208 1100kv brushless motor, 4x 8 inch foldable drone propeller, 1kg abs filament, m2*6,*8,*10,*18 screws a lot, 10x m3*8 screws, 8x m3*16 crews with nut, 2x rectangular led 2*5*7.
3d stl, blender file:
https://drive.google.com/file/d/1k-i5fMZrG_uVSXMSH1is7coU2jaz3ifT/view?usp=drivesdk
Command for usc32:
https://drive.google.com/file/d/1RqWpAFw8zAuXES1zOCFc2Hh7Iln-X8rt/view?usp=drivesdk
Видео Dracoid : Blender to printer. (anet a8 3d printer) канала tang woonthai
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Humidity relay with arduino Nano and DHT11. (not robot project, robot fans can skip this video)1811 brushless cycloidal : RPM test.Nezha SS - Arduino super mecha (FreeCAD) #1Cancer ms: side stepRobot BOSS FIGHT!!!Nezha SS - upgraded earM.A.T.H SS - Support arm assembly.Cancer ms: 3d printed arduino humanoid robot for beginners.Karkinos SS - better turning, walking forward and rolling codes updated .Dracoid - How to make humanoid robot walk part 2Nezha MS - VTOL humanoid transform (vertical) #1Catapult : side step and turning.Making humanoid robot body with aluminum frame + 3d printer remake.Arduino robot controller, with esp32, espnow.Cancer ms: walking test 2Nezha SS - Arduino super mecha #2M.A.T.H SS - Artillery arm assembly.Raven ms- breaking 1kg thrust #oversized propeller +10Catapult : 10 dof bipedal robot cost as low as RM174(usd40)Karkinos SS - side roll